Beko Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Beko oven will not heat; the display shows E01 shortly after turning on any cooking function.
Main Temperature Sensor (NTC) Open Circuit
E02
Beko oven overheats or shuts down with an E02 error; the temperature rises far above the set value.
Temperature Sensor (NTC) Short Circuit / Overheat Detection
E03
Beko oven does not heat and displays E03; the fan may run, but no elements energize.
Overheat Safety Thermostat / Thermal Cut-Out Tripped or Open
E04
Beko oven shows E04 and will not start; it sometimes appears after a power surge or when selecting a function.
Main Control Board Relay / Power Supply Fault
E05
Beko oven display shows E05, and the cooling fan or oven fan does not run when a function is selected.
Oven Fan Motor or Cooling Fan Motor Fault
E06
Beko oven shows E06, and the grill or top heating element does not heat.
Grill Element or Grill Circuit Fault
E07
Beko oven shows E07, and the main lower heating element does not heat in conventional bake mode.
Bottom Oven Element Circuit Fault
E08
Beko oven displays E08, and the fan-assisted heating function does not work; the fan may run, but no heat.
Fan Element (Ring Element) Circuit Fault
E09
Beko oven shows E09, and the display or touch controls behave erratically or are blank.
User Interface / Display Board Communication Fault
E10
Beko oven shows E10 and will not start; this error is often associated with models that have a cooling fan and door switch monitoring.
Door Switch or Door Lock Detection Fault
E11
Beko oven shows E11, and the cooling fan runs continuously or not at all, regardless of oven temperature.
Cooling Fan Temperature Control / Sensor Fault
E12
Beko oven shows E12, and the pyrolytic self-cleaning cycle will not start or aborts shortly after starting.
Pyrolytic Lock / High-Temperature Protection Fault
E13
Beko oven shows E13, and the clock/timer cannot be set or loses time frequently.
Clock / Timer Circuit Fault
E14
Beko oven shows E14, and some or all touch buttons do not respond.
Capacitive Touch Panel Fault
E15
Beko oven shows E15, and trips the household circuit breaker when a heating function is selected.
Earth Leakage / Short Circuit Detection
E16
Beko oven shows E16, and the interior light does not work; the oven otherwise heats normally.
Oven Lamp Circuit Fault
E17
Beko oven shows E17, and the cooling fan continues to run for an excessively long time after the oven is turned off.
Cooling Fan Overrun / Thermostat Stuck Closed
E18
Beko oven shows E18, and the oven shuts down unexpectedly during cooking.
Mains Supply / Voltage Monitoring Fault
Symptom
Oven control panel or knobs become extremely hot to the touch during normal cooking.
Cooling / Ventilation Deficiency
Symptom
Oven does not heat at all; the fan and light may work, but no warmth is present in any mode, and no error code is displayed.
Total Heating Failure
Symptom
Oven fan is not working; the oven may still heat, but cooking is uneven and hot spots occur.
Convection Fan Failure
Symptom
Oven knobs are very stiff or difficult to turn; selecting functions or temperatures is difficult.
Selector Switch or Thermostat Shaft Binding
Symptom
Oven shelves tilt or slide out unexpectedly when pulled partially, making it unsafe to remove hot dishes.
Shelf Support / Runner Wear or Misfit
Symptom
Oven timer and display are blank; the oven does not respond, but the mains supply to the kitchen circuit is present.
No Power to Control Panel
Symptom
The grill does not work; oven functions are normal, but no heat comes from the top grill element.
Grill Heating Failure
Symptom
The oven display and functions reset or flicker when another high-power appliance in the house is used.
Supply Voltage Drop Sensitivity
Symptom
The oven door does not seal properly; visible gaps appear around the door, and excessive heat escapes to the front.
Door Gasket / Seal Failure
Symptom
The oven door glass is loose, rattling, or has condensation between the inner and outer panes.
Door Glass Assembly / Seal Failure
Symptom
The oven door will not close fully; heat escapes, and cooking is uneven.
Door Hinge or Hinge Receiver Wear
Symptom
The oven emits a metallic clicking or arcing sound and visible sparks when using the grill or elements.
Electrical Arcing at Element or Connections
Symptom
The oven emits a strong burning smell or smoke during normal cooking (not first use or after a spill).
Overheating / Residue Burning on Elements or Insulation
Symptom
The oven heats but does not reach the set temperature or takes excessively long to cook food.
Underheating / Inaccurate Temperature Control
Symptom
The oven interior light stays on all the time, even when the door is closed and the oven is off.
Door Switch Stuck or Shorted
Symptom
The oven light works, but none of the heating elements operate in any mode; the timer display is on.
Selector Switch or Timer Interlock Failure
Symptom
The oven makes loud rattling or grinding noises when the fan is running.
Fan Motor Bearing Wear / Fan Blade Obstruction
Symptom
The oven overheats and burns food even at low temperature settings; the exterior may feel excessively hot.
Thermostat Stuck Closed / Sensor Misreading
Symptom
The oven trips the RCD (residual current device) or fuse when heating up, especially when elements get hot.
Element Insulation Breakdown to Earth
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Beko oven will not heat; the display shows E01 shortly after turning on any cooking function.
|
Main Temperature Sensor (NTC) Open Circuit | View Details |
| E02 |
Beko oven overheats or shuts down with an E02 error; the temperature rises far above the set value.
|
Temperature Sensor (NTC) Short Circuit / Overheat Detection | View Details |
| E03 |
Beko oven does not heat and displays E03; the fan may run, but no elements energize.
|
Overheat Safety Thermostat / Thermal Cut-Out Tripped or Open | View Details |
| E04 |
Beko oven shows E04 and will not start; it sometimes appears after a power surge or when selecting a function.
|
Main Control Board Relay / Power Supply Fault | View Details |
| E05 |
Beko oven display shows E05, and the cooling fan or oven fan does not run when a function is selected.
|
Oven Fan Motor or Cooling Fan Motor Fault | View Details |
| E06 |
Beko oven shows E06, and the grill or top heating element does not heat.
|
Grill Element or Grill Circuit Fault | View Details |
| E07 |
Beko oven shows E07, and the main lower heating element does not heat in conventional bake mode.
|
Bottom Oven Element Circuit Fault | View Details |
| E08 |
Beko oven displays E08, and the fan-assisted heating function does not work; the fan may run, but no heat.
|
Fan Element (Ring Element) Circuit Fault | View Details |
| E09 |
Beko oven shows E09, and the display or touch controls behave erratically or are blank.
|
User Interface / Display Board Communication Fault | View Details |
| E10 |
Beko oven shows E10 and will not start; this error is often associated with models that have a cooling fan and door switch monitoring.
|
Door Switch or Door Lock Detection Fault | View Details |
| E11 |
Beko oven shows E11, and the cooling fan runs continuously or not at all, regardless of oven temperature.
|
Cooling Fan Temperature Control / Sensor Fault | View Details |
| E12 |
Beko oven shows E12, and the pyrolytic self-cleaning cycle will not start or aborts shortly after starting.
|
Pyrolytic Lock / High-Temperature Protection Fault | View Details |
| E13 |
Beko oven shows E13, and the clock/timer cannot be set or loses time frequently.
|
Clock / Timer Circuit Fault | View Details |
| E14 |
Beko oven shows E14, and some or all touch buttons do not respond.
|
Capacitive Touch Panel Fault | View Details |
| E15 |
Beko oven shows E15, and trips the household circuit breaker when a heating function is selected.
|
Earth Leakage / Short Circuit Detection | View Details |
| E16 |
Beko oven shows E16, and the interior light does not work; the oven otherwise heats normally.
|
Oven Lamp Circuit Fault | View Details |
| E17 |
Beko oven shows E17, and the cooling fan continues to run for an excessively long time after the oven is turned off.
|
Cooling Fan Overrun / Thermostat Stuck Closed | View Details |
| E18 |
Beko oven shows E18, and the oven shuts down unexpectedly during cooking.
|
Mains Supply / Voltage Monitoring Fault | View Details |
| – |
Oven control panel or knobs become extremely hot to the touch during normal cooking.
|
Cooling / Ventilation Deficiency | View Details |
| – |
Oven does not heat at all; the fan and light may work, but no warmth is present in any mode, and no error code is displayed.
|
Total Heating Failure | View Details |
| – |
Oven fan is not working; the oven may still heat, but cooking is uneven and hot spots occur.
|
Convection Fan Failure | View Details |
| – |
Oven knobs are very stiff or difficult to turn; selecting functions or temperatures is difficult.
|
Selector Switch or Thermostat Shaft Binding | View Details |
| – |
Oven shelves tilt or slide out unexpectedly when pulled partially, making it unsafe to remove hot dishes.
|
Shelf Support / Runner Wear or Misfit | View Details |
| – |
Oven timer and display are blank; the oven does not respond, but the mains supply to the kitchen circuit is present.
|
No Power to Control Panel | View Details |
| – |
The grill does not work; oven functions are normal, but no heat comes from the top grill element.
|
Grill Heating Failure | View Details |
| – |
The oven display and functions reset or flicker when another high-power appliance in the house is used.
|
Supply Voltage Drop Sensitivity | View Details |
| – |
The oven door does not seal properly; visible gaps appear around the door, and excessive heat escapes to the front.
|
Door Gasket / Seal Failure | View Details |
| – |
The oven door glass is loose, rattling, or has condensation between the inner and outer panes.
|
Door Glass Assembly / Seal Failure | View Details |
| – |
The oven door will not close fully; heat escapes, and cooking is uneven.
|
Door Hinge or Hinge Receiver Wear | View Details |
| – |
The oven emits a metallic clicking or arcing sound and visible sparks when using the grill or elements.
|
Electrical Arcing at Element or Connections | View Details |
| – |
The oven emits a strong burning smell or smoke during normal cooking (not first use or after a spill).
|
Overheating / Residue Burning on Elements or Insulation | View Details |
| – |
The oven heats but does not reach the set temperature or takes excessively long to cook food.
|
Underheating / Inaccurate Temperature Control | View Details |
| – |
The oven interior light stays on all the time, even when the door is closed and the oven is off.
|
Door Switch Stuck or Shorted | View Details |
| – |
The oven light works, but none of the heating elements operate in any mode; the timer display is on.
|
Selector Switch or Timer Interlock Failure | View Details |
| – |
The oven makes loud rattling or grinding noises when the fan is running.
|
Fan Motor Bearing Wear / Fan Blade Obstruction | View Details |
| – |
The oven overheats and burns food even at low temperature settings; the exterior may feel excessively hot.
|
Thermostat Stuck Closed / Sensor Misreading | View Details |
| – |
The oven trips the RCD (residual current device) or fuse when heating up, especially when elements get hot.
|
Element Insulation Breakdown to Earth | View Details |
No matching codes found
Advertisements