Fisher & Paykel Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Washer-dryer combo will not fill with water; the cycle stops shortly after starting, and E1 is displayed.
Water Inlet Fault
E10
Washer-dryer combo displays E10 and will not start; control panel appears unresponsive or partially functional.
Main Control Board Communication / Power Fault
E11
Washer-dryer combo shows E11 and stops; water remains in drum and door may stay locked.
Drain Timeout / Slow Drain Fault
E12
Washer-dryer combo displays E12 during drying; clothes are hot and damp, cycle ends prematurely.
Dryer Overheating / Thermistor Fault
E13
Washer-dryer combo shows E13 and stops; water may be visible in the base or under the machine.
Leak / Flood Protection Fault
E14
Washer-dryer combo displays E14; drying performance is poor and cycle times are abnormal.
Moisture Sensor / Dryness Detection Fault
E15
Washer-dryer combo shows E15; drum speed is erratic or unit fails to reach full spin speed.
Motor Tachometer / Speed Sensor Fault
E16
Washer-dryer combo displays E16; water temperature is incorrect or fluctuates wildly during wash.
NTC Temperature Sensor Fault (Wash Circuit)
E17
Washer-dryer combo shows E17; unit fills and drains repeatedly without progressing through the cycle.
Siphoning / Incorrect Drain Installation Fault
E18
Washer-dryer combo displays E18; control panel buttons do not respond or respond intermittently.
User Interface / Touch Panel Fault
E19
Washer-dryer combo shows E19; drying cycle does not start even though washing completes normally.
Dryer Start / Relay Fault
E2
Washer-dryer combo does not drain; water remains in the drum, and E2 is displayed.
Drain Pump Fault
E20
Washer-dryer combo displays E20; the unit stops with water in the drum and does not proceed to dry.
Drain Before Dry Fault
E3
Washer-dryer combo does not spin or has a very slow spin; E3 is displayed near the end of the wash cycle.
Spin Fault / Unbalanced or Motor Drive Error
E4
Washer-dryer combo overfills or shows E4 with water level issues; water may be visible in the drum when it should be empty.
Water Level Sensor / Pressure Switch Fault
E5
Washer-dryer combo stops heating water; wash cycles run cold, and E5 is displayed.
Water Heating Fault
E6
Dryer function does not heat; clothes remain wet after the drying cycle, and E6 is displayed.
Dryer Heater / Element Fault
E7
Washer-dryer combo door will not lock at the start of a cycle; E7 is displayed, and the cycle will not begin.
Door Lock Fault
E8
Washer-dryer combo door will not unlock at the end of the cycle; E8 is displayed, and clothes are trapped inside.
Door Unlock / Interlock Fault
E9
Washer-dryer combo stops mid-cycle with E9 displayed; the drum does not turn during wash or spin.
Motor Drive Fault
Symptom
Drying cycle runs but clothes remain damp or take multiple cycles to dry.
Poor Drying Performance
Symptom
Washer-dryer combo display flickers or resets during spin or when the dryer heater turns on.
Voltage Drop / Loose Connection
Symptom
Washer-dryer combo door seal shows visible black mold and occasionally leaks small amounts of water.
Contaminated / Degraded Door Gasket
Symptom
Washer-dryer combo drum does not turn during wash or dry, but the unit fills and drains normally.
Drive System Failure
Symptom
Washer-dryer combo drum has excessive play and can be pushed up and down noticeably by hand.
Suspension / Bearing Wear
Symptom
Washer-dryer combo emits a burning smell during wash or dry cycles.
Overheating / Electrical or Belt Smell
Symptom
Washer-dryer combo emits a grinding or rumbling noise that gets louder at high spin speeds.
Drum Bearing Failure
Symptom
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
Biofilm / Mold Build-Up
Symptom
Washer-dryer combo intermittently trips the household circuit breaker or RCD during operation.
Electrical Short / Earth Leakage
Symptom
Washer-dryer combo leaks from the rear or underneath during drain or spin, with no error code.
Drain Hose / Pump Leak
Symptom
Washer-dryer combo leaks water from the front during wash or rinse, but no error code is displayed.
Door Gasket / Front Seal Leak
Symptom
Washer-dryer combo leaves clothes soaking wet at the end of the cycle, but no error code is shown.
No or Poor Final Spin
Symptom
Washer-dryer combo leaves detergent or softener residue on clothes after washing.
Poor Rinsing / Dispenser Blockage
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin.
Unbalanced Load / Suspension Wear
Symptom
Washer-dryer combo produces a high-pitched squealing or screeching noise when spinning or tumbling.
Drive Belt / Pulley Noise
Symptom
Washer-dryer combo takes excessively long to complete wash cycles.
Extended Cycle Time / Heating or Fill Issue
Symptom
Washer-dryer combo vibrates excessively and walks across the floor during spin.
Installation / Suspension Imbalance
Symptom
Washer-dryer combo will not power on; the display is completely dead.
Power Supply / Main Board Failure
Symptom
Washer-dryer combo will not start; the display is on, but pressing Start does nothing and no code appears.
Start Circuit / Safety Interlock Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Washer-dryer combo will not fill with water; the cycle stops shortly after starting, and E1 is displayed.
|
Water Inlet Fault | View Details |
| E10 |
Washer-dryer combo displays E10 and will not start; control panel appears unresponsive or partially functional.
|
Main Control Board Communication / Power Fault | View Details |
| E11 |
Washer-dryer combo shows E11 and stops; water remains in drum and door may stay locked.
|
Drain Timeout / Slow Drain Fault | View Details |
| E12 |
Washer-dryer combo displays E12 during drying; clothes are hot and damp, cycle ends prematurely.
|
Dryer Overheating / Thermistor Fault | View Details |
| E13 |
Washer-dryer combo shows E13 and stops; water may be visible in the base or under the machine.
|
Leak / Flood Protection Fault | View Details |
| E14 |
Washer-dryer combo displays E14; drying performance is poor and cycle times are abnormal.
|
Moisture Sensor / Dryness Detection Fault | View Details |
| E15 |
Washer-dryer combo shows E15; drum speed is erratic or unit fails to reach full spin speed.
|
Motor Tachometer / Speed Sensor Fault | View Details |
| E16 |
Washer-dryer combo displays E16; water temperature is incorrect or fluctuates wildly during wash.
|
NTC Temperature Sensor Fault (Wash Circuit) | View Details |
| E17 |
Washer-dryer combo shows E17; unit fills and drains repeatedly without progressing through the cycle.
|
Siphoning / Incorrect Drain Installation Fault | View Details |
| E18 |
Washer-dryer combo displays E18; control panel buttons do not respond or respond intermittently.
|
User Interface / Touch Panel Fault | View Details |
| E19 |
Washer-dryer combo shows E19; drying cycle does not start even though washing completes normally.
|
Dryer Start / Relay Fault | View Details |
| E2 |
Washer-dryer combo does not drain; water remains in the drum, and E2 is displayed.
|
Drain Pump Fault | View Details |
| E20 |
Washer-dryer combo displays E20; the unit stops with water in the drum and does not proceed to dry.
|
Drain Before Dry Fault | View Details |
| E3 |
Washer-dryer combo does not spin or has a very slow spin; E3 is displayed near the end of the wash cycle.
|
Spin Fault / Unbalanced or Motor Drive Error | View Details |
| E4 |
Washer-dryer combo overfills or shows E4 with water level issues; water may be visible in the drum when it should be empty.
|
Water Level Sensor / Pressure Switch Fault | View Details |
| E5 |
Washer-dryer combo stops heating water; wash cycles run cold, and E5 is displayed.
|
Water Heating Fault | View Details |
| E6 |
Dryer function does not heat; clothes remain wet after the drying cycle, and E6 is displayed.
|
Dryer Heater / Element Fault | View Details |
| E7 |
Washer-dryer combo door will not lock at the start of a cycle; E7 is displayed, and the cycle will not begin.
|
Door Lock Fault | View Details |
| E8 |
Washer-dryer combo door will not unlock at the end of the cycle; E8 is displayed, and clothes are trapped inside.
|
Door Unlock / Interlock Fault | View Details |
| E9 |
Washer-dryer combo stops mid-cycle with E9 displayed; the drum does not turn during wash or spin.
|
Motor Drive Fault | View Details |
| – |
Drying cycle runs but clothes remain damp or take multiple cycles to dry.
|
Poor Drying Performance | View Details |
| – |
Washer-dryer combo display flickers or resets during spin or when the dryer heater turns on.
|
Voltage Drop / Loose Connection | View Details |
| – |
Washer-dryer combo door seal shows visible black mold and occasionally leaks small amounts of water.
|
Contaminated / Degraded Door Gasket | View Details |
| – |
Washer-dryer combo drum does not turn during wash or dry, but the unit fills and drains normally.
|
Drive System Failure | View Details |
| – |
Washer-dryer combo drum has excessive play and can be pushed up and down noticeably by hand.
|
Suspension / Bearing Wear | View Details |
| – |
Washer-dryer combo emits a burning smell during wash or dry cycles.
|
Overheating / Electrical or Belt Smell | View Details |
| – |
Washer-dryer combo emits a grinding or rumbling noise that gets louder at high spin speeds.
|
Drum Bearing Failure | View Details |
| – |
Washer-dryer combo has a persistent musty or moldy odor inside the drum.
|
Biofilm / Mold Build-Up | View Details |
| – |
Washer-dryer combo intermittently trips the household circuit breaker or RCD during operation.
|
Electrical Short / Earth Leakage | View Details |
| – |
Washer-dryer combo leaks from the rear or underneath during drain or spin, with no error code.
|
Drain Hose / Pump Leak | View Details |
| – |
Washer-dryer combo leaks water from the front during wash or rinse, but no error code is displayed.
|
Door Gasket / Front Seal Leak | View Details |
| – |
Washer-dryer combo leaves clothes soaking wet at the end of the cycle, but no error code is shown.
|
No or Poor Final Spin | View Details |
| – |
Washer-dryer combo leaves detergent or softener residue on clothes after washing.
|
Poor Rinsing / Dispenser Blockage | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin.
|
Unbalanced Load / Suspension Wear | View Details |
| – |
Washer-dryer combo produces a high-pitched squealing or screeching noise when spinning or tumbling.
|
Drive Belt / Pulley Noise | View Details |
| – |
Washer-dryer combo takes excessively long to complete wash cycles.
|
Extended Cycle Time / Heating or Fill Issue | View Details |
| – |
Washer-dryer combo vibrates excessively and walks across the floor during spin.
|
Installation / Suspension Imbalance | View Details |
| – |
Washer-dryer combo will not power on; the display is completely dead.
|
Power Supply / Main Board Failure | View Details |
| – |
Washer-dryer combo will not start; the display is on, but pressing Start does nothing and no code appears.
|
Start Circuit / Safety Interlock Issue | View Details |
No matching codes found
Advertisements