Frigidaire Washer-Dryer Combos Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E11
Washer-dryer combo will not fill with water or fills very slowly; cycle times are extended, and the unit may time out.
Fill Timeout / Long Fill
E13
Washer-dryer combo detects water in the base or an overflow condition; it may stop mid-cycle and attempt to drain continuously.
Water Leak / Overflow Detected
E21
Washer-dryer combo will not drain or drains very slowly; the cycle may stop with water remaining in the drum.
Drain Timeout / No Drain
E23
Washer-dryer combo will not drain; the control may click, but the pump does not run, or E23 appears shortly after a drain is requested.
Drain Pump Relay Failure
E24
Washer-dryer combo intermittently fails to drain; E24 appears and clears after power cycling.
Drain Pump Circuit Error
E31
Washer-dryer combo does not sense water level correctly; it may overfill, underfill, or stop unexpectedly with E31.
Pressure Sensor / Water Level Sensor Failure
E35
Washer-dryer combo overfills with water or shows E35 shortly after filling; it may attempt to drain and refill repeatedly.
Water Level Too High / Overfill
E41
Washer-dryer combo will not start; the display shows E41, and the door may appear closed but is not recognized as locked.
Door Lock Switch Open (Door Not Locked)
E42
Washer-dryer combo door will not unlock at the end of the cycle; E42 is displayed, and clothes remain trapped inside.
Door Lock Stuck Closed
E43
Washer-dryer combo will not start or lock the door; E43 is displayed shortly after pressing Start.
Door Lock Control Circuit Failure
E44
Washer-dryer combo reports a door lock sensor error; the door may lock, but the control does not detect the correct status.
Door Lock Sensor Fault
E45
Intermittent door lock communication error; the washer-dryer combo may stop mid-cycle and display E45.
Door Lock Communication / Wiring Error
E51
The washer-dryer combo will not tumble or spin; E51 is displayed, indicating a motor drive fault.
Motor Drive Error / Motor Control Failure
E52
The washer-dryer combo drum does not reach the proper spin speed; E52 is displayed during the spin cycle.
Tachometer Signal Error
E53
The washer-dryer combo may not start the motor or may stop mid-cycle; E53 indicates a motor control communication error.
Motor Control Communication Fault
E54
The washer-dryer combo experiences motor relay sticking; the drum may continue to turn when it should stop or fail to start.
Motor Relay Stuck
E55
The washer-dryer combo reports motor current too high; it may stop during spin with E55.
Motor Overcurrent
E56
The washer-dryer combo reports motor current too low; the drum may not turn even though the cycle runs.
Motor Undercurrent
E57
The washer-dryer combo detects high current on the inverter or motor control; it may shut down with E57.
Inverter / Motor Control Overcurrent
E58
The washer-dryer combo reports high current on a motor phase; it may not reach full spin speed.
Motor Phase Overcurrent
E59
Washer-dryer combo fails to reach target speed; E59 indicates a missing or erratic tachometer signal.
No Tachometer Signal
E61
Washer-dryer combo does not heat properly during the dry cycle; E61 indicates a long dry time or low temperature.
Dryer Heating Performance Error
E62
Washer-dryer combo overheats during the dry cycle; E62 indicates the temperature is too high.
Dryer Overheating
E63
Washer-dryer combo reports an open heater circuit; no heat during the dry cycle, and E63 is displayed.
Heater Open Circuit
E64
Washer-dryer combo heater relay or element is shorted; this may trip the breaker or cause it to overheat quickly.
Heater Short Circuit
E65
Washer-dryer combo reports a temperature sensor (NTC) fault; drying performance is erratic, or E65 is displayed.
Dryer Temperature Sensor Error
E66
Washer-dryer combo indicates a heater relay failure; it may not heat or may heat erratically.
Heater Relay Failure
E67
Washer-dryer combo reports a control board voltage error; the unit may not power up correctly or may reset.
Control Board Voltage Error
E68
Washer-dryer combo detects a stuck key on the control panel; buttons may not respond correctly.
Keypad Stuck / UI Error
E71
Washer-dryer combo reports a water temperature sensor fault; wash temperatures are incorrect, or E71 is displayed.
Water Temperature Sensor (NTC) Error
E72
Washer-dryer combo reports a water temperature sensor short; it may immediately show E72 on start.
Water Temperature Sensor Short Circuit
E73
Washer-dryer combo reports a water temperature sensor open circuit; it may not heat water correctly.
Water Temperature Sensor Open Circuit
E74
Washer-dryer combo reports the water temperature sensor is out of range; wash temperatures may be inconsistent.
Water Temperature Sensor Calibration Error
Symptom
Washer-dryer combo control panel lights flicker or the display resets randomly during operation.
Intermittent Power / Control Instability
Symptom
Washer-dryer combo door will not open at the end of the cycle; no error code is displayed.
Door Stuck Locked (No Code)
Symptom
Washer-dryer combo drum does not turn during wash or dry, but the unit fills and drains normally.
No Tumble / Drum Not Turning
Symptom
Washer-dryer combo emits a musty or moldy odor from the drum, especially at the start of a cycle.
Biofilm / Mold Growth in Tub
Symptom
Washer-dryer combo is very noisy during spin; there is loud rumbling, roaring, or grinding from the rear of the unit.
Drum Bearing Failure
Symptom
Washer-dryer combo leaks water from the front door area during wash or rinse.
Door Boot (Bellows) Leak
Symptom
Washer-dryer combo leaks water from the rear or bottom during draining or spinning.
Drain System Leak
Symptom
Washer-dryer combo leaves clothes soaking wet at the end of the cycle; the spin seems weak or does not occur.
No Spin / Poor Spin Performance
Symptom
Washer-dryer combo leaves detergent or fabric softener residue on clothes after the cycle.
Detergent Dispensing / Rinsing Issue
Symptom
Washer-dryer combo makes loud banging or knocking noises during spin; the unit may move or shake excessively.
Excessive Vibration / Out-of-Balance Spin
Symptom
Washer-dryer combo produces a burning smell during the dry cycle; may be accompanied by visible smoke from the vent.
Overheating / Lint Ignition Risk
Symptom
Washer-dryer combo produces a high-pitched squealing or screeching noise during tumble or spin.
Drive Belt or Idler Pulley Noise
Symptom
Washer-dryer combo takes a very long time to dry clothes or never fully dries them.
Long Dry Time / Poor Drying
Symptom
Washer-dryer combo trips the household breaker or GFCI during operation.
Electrical Short / Ground Fault
Symptom
Washer-dryer combo will not power on at all; there are no lights or display, and the unit appears completely dead.
No Power / Dead Unit
Symptom
Washer-dryer combo will not start a cycle; lights are on, but pressing Start does nothing.
No Start / Start Circuit Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E11 |
Washer-dryer combo will not fill with water or fills very slowly; cycle times are extended, and the unit may time out.
|
Fill Timeout / Long Fill | View Details |
| E13 |
Washer-dryer combo detects water in the base or an overflow condition; it may stop mid-cycle and attempt to drain continuously.
|
Water Leak / Overflow Detected | View Details |
| E21 |
Washer-dryer combo will not drain or drains very slowly; the cycle may stop with water remaining in the drum.
|
Drain Timeout / No Drain | View Details |
| E23 |
Washer-dryer combo will not drain; the control may click, but the pump does not run, or E23 appears shortly after a drain is requested.
|
Drain Pump Relay Failure | View Details |
| E24 |
Washer-dryer combo intermittently fails to drain; E24 appears and clears after power cycling.
|
Drain Pump Circuit Error | View Details |
| E31 |
Washer-dryer combo does not sense water level correctly; it may overfill, underfill, or stop unexpectedly with E31.
|
Pressure Sensor / Water Level Sensor Failure | View Details |
| E35 |
Washer-dryer combo overfills with water or shows E35 shortly after filling; it may attempt to drain and refill repeatedly.
|
Water Level Too High / Overfill | View Details |
| E41 |
Washer-dryer combo will not start; the display shows E41, and the door may appear closed but is not recognized as locked.
|
Door Lock Switch Open (Door Not Locked) | View Details |
| E42 |
Washer-dryer combo door will not unlock at the end of the cycle; E42 is displayed, and clothes remain trapped inside.
|
Door Lock Stuck Closed | View Details |
| E43 |
Washer-dryer combo will not start or lock the door; E43 is displayed shortly after pressing Start.
|
Door Lock Control Circuit Failure | View Details |
| E44 |
Washer-dryer combo reports a door lock sensor error; the door may lock, but the control does not detect the correct status.
|
Door Lock Sensor Fault | View Details |
| E45 |
Intermittent door lock communication error; the washer-dryer combo may stop mid-cycle and display E45.
|
Door Lock Communication / Wiring Error | View Details |
| E51 |
The washer-dryer combo will not tumble or spin; E51 is displayed, indicating a motor drive fault.
|
Motor Drive Error / Motor Control Failure | View Details |
| E52 |
The washer-dryer combo drum does not reach the proper spin speed; E52 is displayed during the spin cycle.
|
Tachometer Signal Error | View Details |
| E53 |
The washer-dryer combo may not start the motor or may stop mid-cycle; E53 indicates a motor control communication error.
|
Motor Control Communication Fault | View Details |
| E54 |
The washer-dryer combo experiences motor relay sticking; the drum may continue to turn when it should stop or fail to start.
|
Motor Relay Stuck | View Details |
| E55 |
The washer-dryer combo reports motor current too high; it may stop during spin with E55.
|
Motor Overcurrent | View Details |
| E56 |
The washer-dryer combo reports motor current too low; the drum may not turn even though the cycle runs.
|
Motor Undercurrent | View Details |
| E57 |
The washer-dryer combo detects high current on the inverter or motor control; it may shut down with E57.
|
Inverter / Motor Control Overcurrent | View Details |
| E58 |
The washer-dryer combo reports high current on a motor phase; it may not reach full spin speed.
|
Motor Phase Overcurrent | View Details |
| E59 |
Washer-dryer combo fails to reach target speed; E59 indicates a missing or erratic tachometer signal.
|
No Tachometer Signal | View Details |
| E61 |
Washer-dryer combo does not heat properly during the dry cycle; E61 indicates a long dry time or low temperature.
|
Dryer Heating Performance Error | View Details |
| E62 |
Washer-dryer combo overheats during the dry cycle; E62 indicates the temperature is too high.
|
Dryer Overheating | View Details |
| E63 |
Washer-dryer combo reports an open heater circuit; no heat during the dry cycle, and E63 is displayed.
|
Heater Open Circuit | View Details |
| E64 |
Washer-dryer combo heater relay or element is shorted; this may trip the breaker or cause it to overheat quickly.
|
Heater Short Circuit | View Details |
| E65 |
Washer-dryer combo reports a temperature sensor (NTC) fault; drying performance is erratic, or E65 is displayed.
|
Dryer Temperature Sensor Error | View Details |
| E66 |
Washer-dryer combo indicates a heater relay failure; it may not heat or may heat erratically.
|
Heater Relay Failure | View Details |
| E67 |
Washer-dryer combo reports a control board voltage error; the unit may not power up correctly or may reset.
|
Control Board Voltage Error | View Details |
| E68 |
Washer-dryer combo detects a stuck key on the control panel; buttons may not respond correctly.
|
Keypad Stuck / UI Error | View Details |
| E71 |
Washer-dryer combo reports a water temperature sensor fault; wash temperatures are incorrect, or E71 is displayed.
|
Water Temperature Sensor (NTC) Error | View Details |
| E72 |
Washer-dryer combo reports a water temperature sensor short; it may immediately show E72 on start.
|
Water Temperature Sensor Short Circuit | View Details |
| E73 |
Washer-dryer combo reports a water temperature sensor open circuit; it may not heat water correctly.
|
Water Temperature Sensor Open Circuit | View Details |
| E74 |
Washer-dryer combo reports the water temperature sensor is out of range; wash temperatures may be inconsistent.
|
Water Temperature Sensor Calibration Error | View Details |
| – |
Washer-dryer combo control panel lights flicker or the display resets randomly during operation.
|
Intermittent Power / Control Instability | View Details |
| – |
Washer-dryer combo door will not open at the end of the cycle; no error code is displayed.
|
Door Stuck Locked (No Code) | View Details |
| – |
Washer-dryer combo drum does not turn during wash or dry, but the unit fills and drains normally.
|
No Tumble / Drum Not Turning | View Details |
| – |
Washer-dryer combo emits a musty or moldy odor from the drum, especially at the start of a cycle.
|
Biofilm / Mold Growth in Tub | View Details |
| – |
Washer-dryer combo is very noisy during spin; there is loud rumbling, roaring, or grinding from the rear of the unit.
|
Drum Bearing Failure | View Details |
| – |
Washer-dryer combo leaks water from the front door area during wash or rinse.
|
Door Boot (Bellows) Leak | View Details |
| – |
Washer-dryer combo leaks water from the rear or bottom during draining or spinning.
|
Drain System Leak | View Details |
| – |
Washer-dryer combo leaves clothes soaking wet at the end of the cycle; the spin seems weak or does not occur.
|
No Spin / Poor Spin Performance | View Details |
| – |
Washer-dryer combo leaves detergent or fabric softener residue on clothes after the cycle.
|
Detergent Dispensing / Rinsing Issue | View Details |
| – |
Washer-dryer combo makes loud banging or knocking noises during spin; the unit may move or shake excessively.
|
Excessive Vibration / Out-of-Balance Spin | View Details |
| – |
Washer-dryer combo produces a burning smell during the dry cycle; may be accompanied by visible smoke from the vent.
|
Overheating / Lint Ignition Risk | View Details |
| – |
Washer-dryer combo produces a high-pitched squealing or screeching noise during tumble or spin.
|
Drive Belt or Idler Pulley Noise | View Details |
| – |
Washer-dryer combo takes a very long time to dry clothes or never fully dries them.
|
Long Dry Time / Poor Drying | View Details |
| – |
Washer-dryer combo trips the household breaker or GFCI during operation.
|
Electrical Short / Ground Fault | View Details |
| – |
Washer-dryer combo will not power on at all; there are no lights or display, and the unit appears completely dead.
|
No Power / Dead Unit | View Details |
| – |
Washer-dryer combo will not start a cycle; lights are on, but pressing Start does nothing.
|
No Start / Start Circuit Fault | View Details |
No matching codes found
Advertisements