H3
Klarstein Compressor Overload Protection / Overcurrent

Klarstein AC stops with H3 code; the compressor does not restart.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blocked condenser, failed condenser fan, incorrect supply voltage, failing compressor, main PCB current sensing fault

How to Fix / Troubleshooting

Safety: High-voltage and compressor circuits are involved. Unplug or isolate the power before inspection.

Steps:

  • Airflow and cleaning: Clean the condenser coil and ensure fan operation as described for E8.
  • Voltage check: Verify the mains voltage is within specification. Persistent low or high voltage can trigger H3.
  • Fan and capacitor: Confirm the condenser fan runs at full speed; test and replace the fan capacitor if needed.
  • Compressor health: If the compressor is extremely hot to the touch and frequently trips, it may be failing internally and must be evaluated by a refrigeration technician.

An H3 that recurs after airflow and electrical checks usually indicates a compressor or PCB issue requiring professional service.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Compressor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements