AEG
Leakage Current / Poor Grounding
AEG air fryer occasionally gives a mild electric tingle when touching the metal exterior.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty ground connection in the mains plug, Damaged power cord, Internal insulation breakdown, Capacitive leakage from SMPS without proper grounding
How to Fix / Troubleshooting
Safety first: Stop using the appliance immediately. Unplug it and do not reconnect until the issue is resolved. This indicates a risk of electric shock.
Steps to investigate:
- Check outlet and plug: Ensure the outlet is properly grounded (earthed). Inspect the plug for a secure ground (earth) pin connection.
- Inspect power cord: Look for damage or modifications. Replace the power cord if any defect is found.
- Internal ground connections: Open the housing and verify that the ground (earth) wire is securely fastened to the chassis with a screw and star washer.
- Insulation tests: A qualified technician should perform insulation resistance and earth leakage tests to identify any breakdown in insulation.
- Do not bypass the ground connection: Never remove or disable the ground (earth) connection to stop the tingling; this is extremely dangerous.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements