Display shows CLG or a clog icon; suction is reduced and unit may pulse

Safety first: Turn OFF and remove the battery before clearing clogs.

• Empty dirt bin: Remove and empty the dirt tank. Do not allow debris to reach the MAX fill line.
• Check wand: Detach the wand and look through it toward a light source. Use a flexible brush or rod to push out any obstructions.
• Inspect nozzle: Remove the floor nozzle and check the suction channel and brush area for blockages (e.g., pet toys, large debris). Clear thoroughly.
• Clean cyclone shroud: Remove the cyclone assembly and brush off fine dust from the mesh shroud. Compressed air can help, but use short bursts and wear eye protection.
• Reassemble and test: Reinstall all components securely and test suction. If CLG persists with clear airflow, the airflow sensor or main PCB may be faulty.