E15
Crosley
User Interface / Touch Panel Fault
Dishwasher displays E15; unit may not respond to controls or may shut off unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed touch control panel, Damaged ribbon cable, Moisture intrusion into control panel, Shorted UI circuit
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before removing the door panel.
- Inspect control panel: Look for signs of moisture, cracks, or physical damage on the front panel.
- Remove inner door panel: Access the user interface board and ribbon cable. Ensure the cable is fully seated and not pinched or torn.
- Dry moisture: If condensation or water is present inside the panel, dry thoroughly and identify the source of the leak (often a vent or door gasket issue).
- Test button response: After drying and reseating cables, restore power and test each button. If some or all buttons remain unresponsive, the UI board or panel is likely faulty.
- Replace UI panel: Install a new OEM user interface/touch panel assembly if the original is defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements