Dishwasher displays E17; the unit may not fill properly, or may report a low water level despite a normal supply.

Safety first: Turn off power and water before disconnecting hoses.

• Check shutoff valve: Ensure the under-sink valve feeding the dishwasher is fully open.
• Inspect supply hose: Look for kinks or sharp bends in the stainless or braided hose. Straighten or replace if damaged.
• Clean inlet screen: Disconnect the hose at the dishwasher and remove any debris from the small screen in the Dacor inlet valve.
• Verify house pressure: If other fixtures also have low pressure, address the plumbing issue. Dishwashers typically require at least 20–30 psi.
• Test fill again: Restore water and power, then run a short cycle to confirm that E17 is cleared.