Dishwasher displays E11; the unit may fill but not spray, or it may stop with water remaining in the tub.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Overheated circulation pump, Blocked spray arms causing a high load, Foreign object in the pump, Failing motor windings

Safety first: Turn off the power and allow the dishwasher to cool for at least 30 minutes.

Check spray arms: Remove the upper and lower spray arms and inspect the jets for clogs. Rinse them under running water and clear any debris with a toothpick.
Inspect sump for debris: Remove the filters and look for items like glass, bones, or labels that could obstruct the pump.
Run a test with empty load: After cleaning, run a short cycle with no dishes to reduce the load and see if E11 reappears.
If error returns quickly: The circulation pump motor may be overheating due to an internal failure and should be replaced.

Medium 3/5

Circulation Pump

Check Price on Amazon

We may earn a commission from links on this page.