Fisher & Paykel Dishwashers Error Codes

E1

Dishwasher displays E1; the unit does not fill properly or stops early in the cycle.

Water Inlet Timeout

E2

Dishwasher displays E2; water remains in the tub after the cycle, or the unit stops with an error during draining.

Drain Timeout

E3

Dishwasher displays E3; the cycle runs but dishes are cold and may not dry properly.

Heating Fault / Water Not Reaching Temperature

E4

Dishwasher displays E4; it may overfill or leak, or stop with beeping.

Overflow / Overfill Protection Activated

E5

Dishwasher displays E5; the cycle may not start or may stop early.

Door Not Closed / Door Switch Error

E6

Dishwasher displays E6; the unit may not start or may stop with an error.

Water Temperature Sensor Fault

E7

Dishwasher displays E7; spray arms may not rotate properly, and cleaning is poor.

Circulation Pump / Motor Fault

E8

Dishwasher displays E8; this may indicate a water distribution or diverter issue.

Diverter / Spray Arm Distribution Fault

E9

Dishwasher displays E9; the unit may stop with an error and not respond correctly.

Control Board / EEPROM Error

F1

DishDrawer or dishwasher beeps continuously and displays F1; unit will not start a cycle.

Flood Switch Activation / Water in Base Pan

F10

DishDrawer or dishwasher displays F10; unit may not start or may stop mid-cycle.

Ambient Temperature / Overheat Fault

F11

DishDrawer or dishwasher displays F11; cycle may not start or may stop with beeping.

Single-Drawer Communication Fault (Double DishDrawer models)

F12

DishDrawer or dishwasher displays F12; both drawers may be inoperative on double models.

Communication Fault Between Main Control and Drawer

F13

DishDrawer or dishwasher displays F13; the unit may not start or may stop with an error.

Water Softener / Regeneration Fault (models with integrated softener)

F14

DishDrawer or dishwasher displays F14; the cycle may not start.

Fill Valve / Diverter Fault

F15

DishDrawer or dishwasher displays F15; the unit may not start or may stop with an error.

Heater Fault / Heating Circuit Failure

F16

DishDrawer or dishwasher displays F16; this may be accompanied by unusual noises.

Water Level / Pressure Sensor Fault

F17

DishDrawer or dishwasher displays F17; the unit may not start.

Door / Drawer Not Closed or Door Switch Fault

F18

DishDrawer or dishwasher displays F18; this may be accompanied by unusual noises.

Fan / Drying System Fault (models with fan dry)

F2

DishDrawer or dishwasher displays F2 and may beep; wash cycle stops or will not start.

Motor Rotor Fault / Motor Stalled

F3

DishDrawer or dishwasher displays F3; may stop mid-cycle or not start.

Temperature Sensor / Thermistor Fault

F4

DishDrawer or dishwasher displays F4 and will not complete the cycle; water may remain in the tub.

Drain Fault / Pump Out Failure

F5

DishDrawer or dishwasher displays F5; cycle may not start or may stop shortly after starting.

Lid / Drawer Seal Fault (DishDrawer models)

F6

DishDrawer or dishwasher displays F6; unit may not fill with water.

Water Inlet Fault / No Fill

F7

DishDrawer or dishwasher displays F7; may stop mid-cycle or not start.

Motor Controller / Hall Sensor Fault

F8

DishDrawer or dishwasher displays F8; cycle may not start or may stop unexpectedly.

Electronic Control / EEPROM Fault

F9

DishDrawer or dishwasher displays F9; may not drain or may overfill.

Electronics / Power Supply Fault

Symptom

Control panel buttons are unresponsive or only some buttons work intermittently.

User Interface / Touchpad Failure

Symptom

Detergent tablet or powder remains in the dispenser at the end of the cycle.

Detergent Dispenser Not Opening or Poor Water Spray

Symptom

Dishes are not getting clean; food remains on items after a full cycle.

Poor Wash Performance

Symptom

Dishes come out wet; poor drying performance even on heated dry cycles.

Poor Drying / Moist Dishes

Symptom

Dishwasher door drops open too quickly or will not stay open at a comfortable angle.

Door Spring / Cable Failure

Symptom

Dishwasher door is difficult to close or pops open during operation.

Door Alignment / Latch Issue

Symptom

Dishwasher leaks from underneath; water appears at the base or under the cabinet.

Internal Leak into Base Pan

Symptom

Dishwasher makes loud grinding, rattling, or squealing noises during operation.

Abnormal Operating Noise

Symptom

Dishwasher stops mid-cycle and appears to hang without completing.

Cycle Interruption / Control or Sensor Issue

Symptom

Dishwasher vibrates excessively or moves during operation.

Excessive Vibration / Movement

Symptom

Rust spots appearing on the interior or on dish racks.

Corrosion / Rack Coating Failure

Symptom

The dishwasher does not drain; water remains in the bottom after the cycle completes.

Poor or No Drainage

Symptom

The dishwasher fills with water but does not wash; the spray arms do not move, and dishes remain dirty.

Circulation Pump Not Running

Symptom

The dishwasher is leaking water onto the floor from the front or sides during a cycle.

External Water Leak

Symptom

The dishwasher powers on but will not start a cycle when 'Start' is pressed.

Start Inhibit / User Interface or Door Latch Fault

Symptom

The dishwasher will not power on at all; there are no lights or display, and no response to buttons.

No Power / Dead Appliance

Symptom

Top rack dishes are not getting clean while bottom rack is mostly clean.

Upper Spray Arm / Water Distribution Issue

Symptom

Unpleasant odor coming from the dishwasher, especially when opened after being idle.

Odor / Biofilm Buildup

Symptom

White film or cloudy residue on dishes and glassware after washing.

Limescale / Detergent Residue