E19
Montpellier
Communication Error Between Main PCB and Display PCB
Dryer displays E19; it may not respond correctly to control inputs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or damaged communication cable, Oxidized connector pins, Faulty display PCB
How to Fix / Troubleshooting
Safety first: Disconnect the mains power before accessing the control panel.
- Remove top cover: Unscrew and slide off the top panel to access the wiring for the front display.
- Reseat connectors: Disconnect and reconnect the ribbon cable or harness between the main PCB and the display PCB several times to clean the contacts.
- Inspect for damage: Look for pinched cables or corrosion on the connectors. Replace any damaged cables.
- Test operation: Reassemble and power on the appliance. If E19 persists, either the main PCB or the display PCB may require replacement and should be tested by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements