Dryer runs, but the display shows a very short remaining time, and clothes stay wet.

Safety first: Turn off and unplug the dryer before performing any internal work.

• Clean sensor bars: Wipe the metal moisture sensor strips inside the drum with a cloth and white vinegar to remove residues.
• Adjust load size: Auto-dry works best with medium-sized loads. Very small loads may not contact the sensors enough; use a timed program for very small loads.
• Check wiring: If the problem persists, access the sensor connections behind the front panel and ensure wires are intact and firmly connected.
• Control check: If cleaning and wiring are fine, the control board may misinterpret sensor signals and might need replacement.