Lucid No Power / Dead Unit

Lucid home charger completely dead – no lights, no display, no fan noise.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Tripped or open breaker feeding Lucid charger, Loose line connections at input terminal block, Failed internal input fuse on Lucid control or power board

How to Fix / Troubleshooting

Safety first: Treat the circuit as live until proven otherwise. Use a non-contact tester and turn OFF the breaker before opening the charger.

Steps:

  • Check breaker: Verify the dedicated Lucid charger breaker is ON and not tripped. Reset once if tripped; if it trips again, stop and investigate.
  • Test outlet (if plug-in): Plug another high-load device into the same receptacle to confirm power is present.
  • Inspect input wiring: With cover removed and power OFF, check that L1, L2, and ground are firmly attached to the Lucid input terminal block.
  • Internal fuse: Some Lucid models include an internal low-voltage fuse on the control board. Visually inspect and replace only with the exact type and rating if blown.

Resolution: If supply power is present and fuses are intact but the unit remains dead, the Lucid control board or internal power supply has failed and must be replaced.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Lucid Control Board / Internal Power Supply
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements