Hansa Earth Leakage / Ground Fault

The freezer trips a GFCI/RCD outlet intermittently, especially when the compressor or defrost cycle starts.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Moisture in the defrost heater or wiring, Insulation breakdown in the compressor, Water ingress into the control board, Damaged power cord

Safety first: Leave the freezer unplugged until the cause is identified. Do not repeatedly reset a tripping GFCI/RCD.

Step-by-step checks:

1. Inspect cord and plug: Replace if any damage is visible.
2. Check for moisture: Look for water around the defrost heater area, wiring, and control board. Dry thoroughly and correct any leaks.
3. Component testing: A technician should perform insulation resistance tests on the compressor and heater to locate leakage paths.

Professional Required 5/5

Defrost Heater

Check Price on Amazon

We may earn a commission from links on this page.