RCA freezer interior light stays on even when the door is closed; the cabinet may get warm near the light.

Safety first: Unplug the freezer before working on the light or switch. Light bulbs can be hot.

Steps to fix the light staying on:

• 1. Check door switch action: Locate the door switch on the frame. Press it by hand; the light should turn off. If not, the switch or wiring is faulty.
• 2. Inspect door alignment: Ensure the door is not sagging and that it fully depresses the switch when closed. Adjust hinges if necessary.
• 3. Test the switch: Remove the switch (usually snaps or screws out), disconnect wires, and test continuity. It should change state when pressed. Replace with an RCA-compatible door switch if defective.
• 4. Check the bulb and socket: Inspect the bulb and socket for signs of overheating or melting. Replace damaged parts.
• 5. Verify operation: After replacement, close the door and confirm the light turns off by looking for light leaks around the gasket or listening for the switch click.

Warning: A light that stays on can overheat the liner and raise the freezer temperature; correct this promptly.