Furnace LED displays code 41; the blower may run at an incorrect speed or fail to start.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety: Turn off power before accessing the blower. Capacitors can retain a charge; discharge them only if you are trained to do so.
Steps to check:
- Visual inspection: Check the blower motor and capacitor for bulging, a burnt smell, or leaking oil (capacitor).
- Harness connections: Ensure all motor connectors are fully seated on the Luxaire control board and motor.
- Spin test: Rotate the blower wheel by hand. If it feels stiff or noisy, the bearings may be failing.
When to call a pro: A technician should test motor amperage, capacitor value, and the ECM module. Blower motor or module replacement should use Luxaire-approved parts.
Repair Difficulty
Required Part
We may earn a commission from links on this page.