The disposal trips the reset button immediately when turned on, even with no load in the chamber.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted Evergrind motor windings, Severely seized Evergrind rotor, Failed Evergrind overload device, Internal obstruction not visible in the chamber

Safety first: Turn OFF power at the breaker.

Check for free rotation: Use the Evergrind hex wrench to attempt to rotate the turntable. If it does not move, there may be an internal obstruction or seized rotor.
Inspect chamber: Remove any visible debris with tongs. Do not force rotation if it is completely seized.
Attempt one reset: Press the reset button and test briefly. If it trips instantly once more, discontinue use.
Replace disposer: Internal electrical or mechanical failure requires replacement of the Evergrind unit.

Hard 4/5

Evergrind disposer unit

Check Price on Amazon

We may earn a commission from links on this page.