Electrolux ice maker is not making any ice at all; the display appears normal, and no error code is shown.

Safety First: Unplug the unit and shut off water before disconnecting any lines.

• Confirm ice function is enabled: Check the control panel to ensure the ice maker is not in 'Off' or 'Clean' mode, and reset it to normal ice production if necessary.
• Verify water supply: Make sure the shutoff valve is fully open and the supply line is not kinked. If your Electrolux model uses a water filter, replace it if it is older than 6 months or if water flows slowly.
• Test water fill: Start a cycle and listen for the inlet valve. If you do not hear water entering, test the valve coil resistance and replace the valve if found defective.
• Inspect for internal ice blockages: Remove the bin and check for large ice clumps blocking the evaporator or harvest mechanism. Defrost and clean as necessary.