Fisher & Paykel Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
E1 displayed on the Fisher & Paykel ice maker or refrigerator display; the ice maker is disabled.
Ice Maker Sensor General Error
E2
E2 displayed; the ice maker stops and may not respond to on/off commands.
Ice Maker PCB / EEPROM Error
E3
E3 displayed; the ice maker cycles, but the ice bin remains empty or only partially filled.
Ice Production Time-Out Fault
E4
E4 displayed; the ice maker stops and may show signs of frost or ice buildup around the mechanism.
Ice Maker Defrost / Heater Overload Fault
E5
E5 displayed; the ice maker stops, and the water dispenser (if present) may also be affected.
Water System Error (Shared Valve / Flow Fault)
E6
E6 is displayed, the ice maker stops, and the display may indicate a door or drawer issue.
Ice Maker Door Switch / Interlock Fault
E7
E7 is displayed, the ice maker stops, and the bin may be full or nearly full.
Ice Bin Full Sensor Fault
E8
E8 is displayed, the ice maker is noisy, and may stop intermittently.
Ice Auger / Dispenser Motor Fault (if equipped with dispenser)
E9
E9 is displayed, and the ice maker and possibly other refrigerator functions behave erratically after a power event.
Power Supply / Voltage Error Affecting Ice Maker
F1
Ice maker beeps and displays F1, ice production stops or is severely reduced.
Ice Maker Thermistor Fault
F10
F10 displayed; no ice production, and the main display may show a general ice maker fault icon.
Ice Maker Communication / Control Fault
F2
F2 displayed, ice maker compartment too warm, ice is soft or melting and production is slow.
Ice Compartment Overtemperature Fault
F3
F3 displayed, ice maker stops and may dump partially frozen or misshapen cubes.
Ice Mold Heater or Defrost Circuit Fault
F4
F4 displayed, no water entering ice maker, ice production stops completely.
Ice Maker Water Fill Fault
F5
F5 displayed, ice maker cycles erratically or stops mid-cycle, sometimes with a clicking sound.
Ice Maker Motor or Position Switch Fault
F6
F6 displayed; ice bin remains empty even though water fills and freezes.
Ice Ejector or Harvest Fault
F7
F7 displayed; ice maker overfills mold, or water leaks into the ice bin and freezes into a block.
Ice Maker Overfill / Water Level Fault
F8
F8 displayed; ice maker compartment is extremely cold, with ice clumping and frost buildup around the ice maker.
Ice Compartment Sensor Calibration / Short Fault
F9
F9 displayed; ice maker fan runs loudly or not at all, and ice production is inconsistent.
Ice Compartment Fan Feedback Fault
Symptom
Ice cubes are cloudy, white, or contain particles.
Water Quality / Air Entrapment in Ice
Symptom
Ice cubes are fused together into large clumps in the bin.
Ice Clumping in Storage Bin
Symptom
Ice maker causes loud banging or knocking sounds from the freezer area.
Ice Expansion or Ejector Impact Noise
Symptom
Ice maker cycles but drops ice behind the bin or into the freezer instead of into the bin.
Misaligned Ice Maker or Bin
Symptom
Ice maker fan is loud or whines continuously.
Ice Compartment Fan Bearing Wear
Symptom
Ice maker fills with water but does not freeze the water into ice.
Insufficient Cooling at Ice Maker
Symptom
Ice maker freezes solid into a block of ice around the mold and mechanism.
Ice Maker Overfill and Freeze-Up
Symptom
Ice maker freezes up with heavy frost around the assembly and bin.
Excessive Frost / Moisture Ingress
Symptom
Ice maker is producing ice, but there is a strong plastic or chemical odor in the ice.
Odor Contamination of Ice
Symptom
Ice maker is very noisy during operation (grinding, clicking, or knocking sounds).
Mechanical Noise from Ice Maker Drive
Symptom
Ice maker overflows the bin, ice spilling into freezer compartment.
Ice Level Control Failure
Symptom
Ice maker runs continuously even when turned off at the control panel.
Ice Maker Control Stuck ON
Symptom
Ice maker stops working after a power outage but no error code is shown.
Post-Outage Control Lockup
Symptom
Ice maker will not turn on from the control panel (no response when enabling ice).
Ice Maker Enable Circuit Failure
Symptom
Ice tastes bad or has a metallic/chemical flavor.
Taste Contamination of Ice
Symptom
The ice maker fill tube keeps freezing up, blocking water from entering the mold.
Frozen Ice Maker Fill Tube
Symptom
The ice maker is leaking water inside the freezer or ice compartment.
Internal Ice Maker Water Leak
Symptom
The ice maker is making ice, but the cubes are hollow or very small.
Insufficient Water Fill to Ice Mold
Symptom
The ice maker is not making any ice at all (no error code displayed).
Complete Ice Production Failure
Symptom
The ice maker makes ice very slowly; the bin never fills up.
Reduced Ice Production Rate
Symptom
Water dispenser works but ice maker does not fill with water.
Ice Maker Solenoid Failure on Multi-Valve
Symptom
Water is leaking onto the floor from behind or under the Fisher & Paykel refrigerator with an ice maker.
External Ice Maker Water Supply Leak
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
E1 displayed on the Fisher & Paykel ice maker or refrigerator display; the ice maker is disabled.
|
Ice Maker Sensor General Error | View Details |
| E2 |
E2 displayed; the ice maker stops and may not respond to on/off commands.
|
Ice Maker PCB / EEPROM Error | View Details |
| E3 |
E3 displayed; the ice maker cycles, but the ice bin remains empty or only partially filled.
|
Ice Production Time-Out Fault | View Details |
| E4 |
E4 displayed; the ice maker stops and may show signs of frost or ice buildup around the mechanism.
|
Ice Maker Defrost / Heater Overload Fault | View Details |
| E5 |
E5 displayed; the ice maker stops, and the water dispenser (if present) may also be affected.
|
Water System Error (Shared Valve / Flow Fault) | View Details |
| E6 |
E6 is displayed, the ice maker stops, and the display may indicate a door or drawer issue.
|
Ice Maker Door Switch / Interlock Fault | View Details |
| E7 |
E7 is displayed, the ice maker stops, and the bin may be full or nearly full.
|
Ice Bin Full Sensor Fault | View Details |
| E8 |
E8 is displayed, the ice maker is noisy, and may stop intermittently.
|
Ice Auger / Dispenser Motor Fault (if equipped with dispenser) | View Details |
| E9 |
E9 is displayed, and the ice maker and possibly other refrigerator functions behave erratically after a power event.
|
Power Supply / Voltage Error Affecting Ice Maker | View Details |
| F1 |
Ice maker beeps and displays F1, ice production stops or is severely reduced.
|
Ice Maker Thermistor Fault | View Details |
| F10 |
F10 displayed; no ice production, and the main display may show a general ice maker fault icon.
|
Ice Maker Communication / Control Fault | View Details |
| F2 |
F2 displayed, ice maker compartment too warm, ice is soft or melting and production is slow.
|
Ice Compartment Overtemperature Fault | View Details |
| F3 |
F3 displayed, ice maker stops and may dump partially frozen or misshapen cubes.
|
Ice Mold Heater or Defrost Circuit Fault | View Details |
| F4 |
F4 displayed, no water entering ice maker, ice production stops completely.
|
Ice Maker Water Fill Fault | View Details |
| F5 |
F5 displayed, ice maker cycles erratically or stops mid-cycle, sometimes with a clicking sound.
|
Ice Maker Motor or Position Switch Fault | View Details |
| F6 |
F6 displayed; ice bin remains empty even though water fills and freezes.
|
Ice Ejector or Harvest Fault | View Details |
| F7 |
F7 displayed; ice maker overfills mold, or water leaks into the ice bin and freezes into a block.
|
Ice Maker Overfill / Water Level Fault | View Details |
| F8 |
F8 displayed; ice maker compartment is extremely cold, with ice clumping and frost buildup around the ice maker.
|
Ice Compartment Sensor Calibration / Short Fault | View Details |
| F9 |
F9 displayed; ice maker fan runs loudly or not at all, and ice production is inconsistent.
|
Ice Compartment Fan Feedback Fault | View Details |
| – |
Ice cubes are cloudy, white, or contain particles.
|
Water Quality / Air Entrapment in Ice | View Details |
| – |
Ice cubes are fused together into large clumps in the bin.
|
Ice Clumping in Storage Bin | View Details |
| – |
Ice maker causes loud banging or knocking sounds from the freezer area.
|
Ice Expansion or Ejector Impact Noise | View Details |
| – |
Ice maker cycles but drops ice behind the bin or into the freezer instead of into the bin.
|
Misaligned Ice Maker or Bin | View Details |
| – |
Ice maker fan is loud or whines continuously.
|
Ice Compartment Fan Bearing Wear | View Details |
| – |
Ice maker fills with water but does not freeze the water into ice.
|
Insufficient Cooling at Ice Maker | View Details |
| – |
Ice maker freezes solid into a block of ice around the mold and mechanism.
|
Ice Maker Overfill and Freeze-Up | View Details |
| – |
Ice maker freezes up with heavy frost around the assembly and bin.
|
Excessive Frost / Moisture Ingress | View Details |
| – |
Ice maker is producing ice, but there is a strong plastic or chemical odor in the ice.
|
Odor Contamination of Ice | View Details |
| – |
Ice maker is very noisy during operation (grinding, clicking, or knocking sounds).
|
Mechanical Noise from Ice Maker Drive | View Details |
| – |
Ice maker overflows the bin, ice spilling into freezer compartment.
|
Ice Level Control Failure | View Details |
| – |
Ice maker runs continuously even when turned off at the control panel.
|
Ice Maker Control Stuck ON | View Details |
| – |
Ice maker stops working after a power outage but no error code is shown.
|
Post-Outage Control Lockup | View Details |
| – |
Ice maker will not turn on from the control panel (no response when enabling ice).
|
Ice Maker Enable Circuit Failure | View Details |
| – |
Ice tastes bad or has a metallic/chemical flavor.
|
Taste Contamination of Ice | View Details |
| – |
The ice maker fill tube keeps freezing up, blocking water from entering the mold.
|
Frozen Ice Maker Fill Tube | View Details |
| – |
The ice maker is leaking water inside the freezer or ice compartment.
|
Internal Ice Maker Water Leak | View Details |
| – |
The ice maker is making ice, but the cubes are hollow or very small.
|
Insufficient Water Fill to Ice Mold | View Details |
| – |
The ice maker is not making any ice at all (no error code displayed).
|
Complete Ice Production Failure | View Details |
| – |
The ice maker makes ice very slowly; the bin never fills up.
|
Reduced Ice Production Rate | View Details |
| – |
Water dispenser works but ice maker does not fill with water.
|
Ice Maker Solenoid Failure on Multi-Valve | View Details |
| – |
Water is leaking onto the floor from behind or under the Fisher & Paykel refrigerator with an ice maker.
|
External Ice Maker Water Supply Leak | View Details |
No matching codes found
Advertisements