Ice maker produces ice very slowly; cycles are much longer than normal and ice cubes are small or hollow.

Safety first: Unplug the unit before cleaning or moving it.

• 1. Improve ventilation: Ensure at least 10–15 cm clearance on all sides and that the unit is not enclosed in a cabinet.
• 2. Clean condenser: Remove dust and lint from the condenser coil and fan using a brush and vacuum.
• 3. Check room temperature: Move the ice maker to a cooler room if ambient temperature exceeds the specified range.
• 4. Descale evaporator: Mineral buildup on the evaporator can insulate it. Run a descaling/cleaning cycle with vinegar or approved descaler and wipe the evaporator surface.
• 5. Monitor performance: If performance remains poor after cleaning and ventilation improvements, the compressor or refrigerant charge may be compromised and require professional diagnosis.

Warning: Do not bend or scratch the evaporator surface; it is thin and can be punctured.