Safety first: Disconnect from mains before opening the cabinet.

1. Identify model type: This code is more common on Beko combination microwaves with grill or convection. Confirm your model has these features.
2. Locate grill/convection sensor: The sensor is usually attached near the grill element or in the convection air channel. Remove the outer cover and trace the sensor wires from the top heating area to the control board.
3. Inspect wiring: Look for heat-damaged insulation, loose connectors, or broken wires near the hot zones. Repair or replace damaged wiring.
4. Test sensor: Disconnect and measure resistance at room temperature. Compare with Beko specifications. Replace if open, shorted, or far out of range.
5. Reassemble and test: After replacing the sensor, reassemble the unit, ensuring all shields and covers are correctly fitted, then test grill/convection operation.

Warning: Do not operate the microwave with covers removed; this can expose you to live parts and hot surfaces.

Microwave shows E06 and will not start; grill or convection functions may also be disabled on combi models.

Possible Causes