Oven displays F3E0; the oven may not heat or may shut off.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open or shorted upper oven sensor, Damaged upper oven sensor harness, Loose connector at the EOC for the upper sensor

Safety first: Turn off power at the breaker before accessing the upper oven sensor or control.

Step-by-step checks:

Locate upper sensor: In a double oven, the upper sensor is mounted on the rear wall of the upper cavity. Remove mounting screws and gently pull it forward.
Test resistance: Disconnect the sensor and measure its resistance. At room temperature, expect approximately 1050–1100 Ω. Replace if open, shorted, or out of range.
Check harness: Inspect and test continuity from the sensor connector to the EOC upper sensor terminals. Repair any damaged wiring.
Control board: If the sensor and wiring are good, replace the EOC.

Medium 3/5

Upper Oven Temperature Sensor (RTD)

Check Price on Amazon

We may earn a commission from links on this page.