Belling Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
The oven will not heat at all in any mode; the display is on but there is no warmth from the cavity.
Main Oven Heating Circuit Failure
F02
The fan oven is not heating but the fan runs normally; food remains uncooked.
Fan Oven Element Failure
F03
The grill will not heat or only heats very weakly; other oven functions may still work.
Grill Element Circuit Fault
F04
The oven overheats, burning food; the temperature is far higher than set; it may trip the safety thermostat.
Temperature Regulation Failure
F05
Display shows an error and the oven will not start; the temperature reading seems incorrect or fluctuates rapidly.
Oven Temperature Sensor Circuit Fault
F06
The oven display or clock is not responding correctly; buttons may not work or random beeping occurs.
User Interface / Touch Control Fault
F07
The oven cuts out during cooking and then comes back on after cooling; it may show an error code when hot.
Thermal Cut-Out / Safety Thermostat Trip
F08
The oven fan does not run in fan modes; the oven may overheat locally or cook unevenly.
Oven Circulation Fan Motor Failure
F09
The clock or timer display is blank; oven functions are disabled on models that require clock setting.
Clock / Timer Power or Communication Fault
F10
The oven will not start; the display shows a door-related error or beeps when trying to start (on models with door switch monitoring).
Door Switch / Door Lock Detection Fault
F11
The self-clean or pyrolytic cycle will not start (on pyrolytic Belling models); an error is displayed when attempting to lock the door.
Pyrolytic Door Lock Fault
F12
Oven lights, the fan, or other functions operate unexpectedly or not at all; an error indicates an auxiliary circuit fault.
Auxiliary Output Relay / Circuit Fault
F13
The oven display shows a communication error; some functions may be disabled.
Communication Fault Between Control Boards
F14
The oven will not ignite on gas Belling models; the electronic display shows an ignition fault.
Gas Ignition Failure
F15
Gas oven lights but then goes out after a few seconds; error indicates flame supervision fault.
Flame Failure Device / Thermocouple Fault
F16
Oven interior light not working; error may indicate a lamp circuit fault on some electronic models.
Oven Lamp Circuit Failure
F17
Cooling fan runs continuously even when the oven is cold and off; error indicates a cooling system fault.
Cooling Fan Control Fault
F18
Oven beeps and shows a probe or sensor error when using the meat probe or temperature probe feature (if fitted).
Food Probe / Auxiliary Sensor Fault
F19
Oven shows a power supply or voltage error; it may shut down or refuse to start.
Mains Supply / Power Regulation Fault
F20
Oven shows a generic fault code and locks out most functions after a power surge or outage.
General Control System Fault
Symptom
Control knobs become very hot to touch during cooking.
Insufficient Cooling / Heat Migration to Control Panel
Symptom
Digital clock or timer display is dim, flickering, or partially missing segments.
Display Module Degradation
Symptom
Excessive condensation or steam on the oven door and control panel during cooking.
Ventilation / Steam Management Issue
Symptom
Oven enamel interior is chipped or rusting; may lead to staining or flaking.
Cavity Enamel Damage
Symptom
Oven glass door is cracked or shattered, but oven still operates.
Door Glass Damage
Symptom
Oven heats but takes a very long time to reach temperature; food is undercooked or cooking times are much longer than normal.
Partial Heating / Weak Element Output
Symptom
Oven heats but the temperature is inaccurate; it is either consistently too hot or too cold compared to the setting.
Temperature Calibration / Thermostat Drift
Symptom
Oven light works, but none of the heating functions operate; the selector seems dead.
Function Selector Switch Failure
Symptom
Oven not heating at all, no error code displayed; the fan and light may still work.
Open Heating Circuit Without Electronic Detection
Symptom
Oven racks or side supports have collapsed or will not stay in place.
Rack Support or Side Rail Failure
Symptom
Oven randomly turns off during cooking without tripping the breaker; comes back on after a while.
Intermittent Thermal Cut-Out or Loose Connection
Symptom
Oven trips the household circuit breaker or RCD when turned on or when heating.
Electrical Short or Earth Leakage
Symptom
Oven will not start because the clock is flashing or not set; no heating until time is programmed.
Clock Not Set Lockout
Symptom
The grill overheats or burns food quickly, even on low settings.
Grill Thermostat or Control Fault
Symptom
The grill works, but the main oven does not heat; no error code is displayed.
Main Oven Element or Thermostat Failure
Symptom
The oven door will not close properly; heat escapes, and cooking is uneven.
Door Alignment / Hinge or Seal Failure
Symptom
The oven door will not open after cooking; no error code is displayed.
Door Latch Jam or Thermal Lock Retention
Symptom
The oven fan runs, but there is no heat in fan-assisted modes; conventional heat may still work.
Fan Element Failure with Working Conventional Elements
Symptom
The oven interior light does not work, but all heating functions are normal.
Lamp or Lamp Holder Failure
Symptom
The oven makes loud rattling, scraping, or humming noises during operation.
Mechanical Noise from Fan or Panels
Symptom
The oven produces a burning smell or smoke when in use.
Contamination or Overheating of Internal Components
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
The oven will not heat at all in any mode; the display is on but there is no warmth from the cavity.
|
Main Oven Heating Circuit Failure | View Details |
| F02 |
The fan oven is not heating but the fan runs normally; food remains uncooked.
|
Fan Oven Element Failure | View Details |
| F03 |
The grill will not heat or only heats very weakly; other oven functions may still work.
|
Grill Element Circuit Fault | View Details |
| F04 |
The oven overheats, burning food; the temperature is far higher than set; it may trip the safety thermostat.
|
Temperature Regulation Failure | View Details |
| F05 |
Display shows an error and the oven will not start; the temperature reading seems incorrect or fluctuates rapidly.
|
Oven Temperature Sensor Circuit Fault | View Details |
| F06 |
The oven display or clock is not responding correctly; buttons may not work or random beeping occurs.
|
User Interface / Touch Control Fault | View Details |
| F07 |
The oven cuts out during cooking and then comes back on after cooling; it may show an error code when hot.
|
Thermal Cut-Out / Safety Thermostat Trip | View Details |
| F08 |
The oven fan does not run in fan modes; the oven may overheat locally or cook unevenly.
|
Oven Circulation Fan Motor Failure | View Details |
| F09 |
The clock or timer display is blank; oven functions are disabled on models that require clock setting.
|
Clock / Timer Power or Communication Fault | View Details |
| F10 |
The oven will not start; the display shows a door-related error or beeps when trying to start (on models with door switch monitoring).
|
Door Switch / Door Lock Detection Fault | View Details |
| F11 |
The self-clean or pyrolytic cycle will not start (on pyrolytic Belling models); an error is displayed when attempting to lock the door.
|
Pyrolytic Door Lock Fault | View Details |
| F12 |
Oven lights, the fan, or other functions operate unexpectedly or not at all; an error indicates an auxiliary circuit fault.
|
Auxiliary Output Relay / Circuit Fault | View Details |
| F13 |
The oven display shows a communication error; some functions may be disabled.
|
Communication Fault Between Control Boards | View Details |
| F14 |
The oven will not ignite on gas Belling models; the electronic display shows an ignition fault.
|
Gas Ignition Failure | View Details |
| F15 |
Gas oven lights but then goes out after a few seconds; error indicates flame supervision fault.
|
Flame Failure Device / Thermocouple Fault | View Details |
| F16 |
Oven interior light not working; error may indicate a lamp circuit fault on some electronic models.
|
Oven Lamp Circuit Failure | View Details |
| F17 |
Cooling fan runs continuously even when the oven is cold and off; error indicates a cooling system fault.
|
Cooling Fan Control Fault | View Details |
| F18 |
Oven beeps and shows a probe or sensor error when using the meat probe or temperature probe feature (if fitted).
|
Food Probe / Auxiliary Sensor Fault | View Details |
| F19 |
Oven shows a power supply or voltage error; it may shut down or refuse to start.
|
Mains Supply / Power Regulation Fault | View Details |
| F20 |
Oven shows a generic fault code and locks out most functions after a power surge or outage.
|
General Control System Fault | View Details |
| – |
Control knobs become very hot to touch during cooking.
|
Insufficient Cooling / Heat Migration to Control Panel | View Details |
| – |
Digital clock or timer display is dim, flickering, or partially missing segments.
|
Display Module Degradation | View Details |
| – |
Excessive condensation or steam on the oven door and control panel during cooking.
|
Ventilation / Steam Management Issue | View Details |
| – |
Oven enamel interior is chipped or rusting; may lead to staining or flaking.
|
Cavity Enamel Damage | View Details |
| – |
Oven glass door is cracked or shattered, but oven still operates.
|
Door Glass Damage | View Details |
| – |
Oven heats but takes a very long time to reach temperature; food is undercooked or cooking times are much longer than normal.
|
Partial Heating / Weak Element Output | View Details |
| – |
Oven heats but the temperature is inaccurate; it is either consistently too hot or too cold compared to the setting.
|
Temperature Calibration / Thermostat Drift | View Details |
| – |
Oven light works, but none of the heating functions operate; the selector seems dead.
|
Function Selector Switch Failure | View Details |
| – |
Oven not heating at all, no error code displayed; the fan and light may still work.
|
Open Heating Circuit Without Electronic Detection | View Details |
| – |
Oven racks or side supports have collapsed or will not stay in place.
|
Rack Support or Side Rail Failure | View Details |
| – |
Oven randomly turns off during cooking without tripping the breaker; comes back on after a while.
|
Intermittent Thermal Cut-Out or Loose Connection | View Details |
| – |
Oven trips the household circuit breaker or RCD when turned on or when heating.
|
Electrical Short or Earth Leakage | View Details |
| – |
Oven will not start because the clock is flashing or not set; no heating until time is programmed.
|
Clock Not Set Lockout | View Details |
| – |
The grill overheats or burns food quickly, even on low settings.
|
Grill Thermostat or Control Fault | View Details |
| – |
The grill works, but the main oven does not heat; no error code is displayed.
|
Main Oven Element or Thermostat Failure | View Details |
| – |
The oven door will not close properly; heat escapes, and cooking is uneven.
|
Door Alignment / Hinge or Seal Failure | View Details |
| – |
The oven door will not open after cooking; no error code is displayed.
|
Door Latch Jam or Thermal Lock Retention | View Details |
| – |
The oven fan runs, but there is no heat in fan-assisted modes; conventional heat may still work.
|
Fan Element Failure with Working Conventional Elements | View Details |
| – |
The oven interior light does not work, but all heating functions are normal.
|
Lamp or Lamp Holder Failure | View Details |
| – |
The oven makes loud rattling, scraping, or humming noises during operation.
|
Mechanical Noise from Fan or Panels | View Details |
| – |
The oven produces a burning smell or smoke when in use.
|
Contamination or Overheating of Internal Components | View Details |
No matching codes found
Advertisements