Bomann Door Alignment / Hinge or Seal Failure

Oven door does not close properly or has a gap, heat escapes from front

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or bent door hinges, Deformed door frame, Compressed or torn door gasket, Loose hinge mounting screws

Safety: Ensure oven is cool before working on the door.

Steps:

Inspect the door gasket around the cavity for tears, hard spots, or flattening. Replace if it does not spring back.
Open the door and check the hinges for play or visible bending. Tighten hinge mounting screws on the door and cabinet.
If the door sags or does not align with the cabinet front, replace the door hinges as a pair.
On some Bomann models, hinge receivers in the cavity can also wear; inspect and replace if cracked.

Medium 3/5

Oven Door Hinges

Check Price on Amazon

We may earn a commission from links on this page.