Brandt Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
F01
Oven does not heat in any mode; display and fan operate normally.
Main Heating Element Circuit Failure
F02
Oven overheats; temperature is far above the setpoint, and food burns quickly.
Temperature Regulation Failure (Thermostat / Sensor Fault)
F03
Oven does not reach the set temperature, has a very long preheat time, and produces undercooked food.
Insufficient Heating / Partial Element Failure
F04
The oven display shows an error, the cooling fan runs continuously, and the oven will not start.
Cooling System / Overtemperature Protection Fault
F05
Oven display is on, but keys or rotary selector do not respond.
User Interface/Keypad Communication Error
F06
Oven display completely dead, no lights or response.
Power Supply/Low Voltage Board Failure
F07
Oven door remains locked after cycle, or locks immediately on power-up.
Door Lock Mechanism/Lock Sensor Fault
F08
Pyrolytic self-cleaning cycle will not start; an error is displayed.
Pyrolytic Cycle Safety Fault
F09
Oven fan does not run in fan-assisted modes, leading to uneven cooking.
Convection Fan Motor Failure
F10
Grill function not working, while other modes heat normally.
Grill Heating Element Circuit Failure
F11
Interior light does not work, but the oven otherwise functions normally.
Oven Lamp Circuit Failure
F12
Clock cannot be set, and the oven will not start any cooking program.
Clock/Timer Configuration Lockout
F13
Display shows sensor error, and the oven stops heating mid-cycle.
Cavity Temperature Sensor Open Circuit
F14
Display shows sensor error, and the oven overheats or never reaches the set temperature.
Cavity Temperature Sensor Short Circuit
F15
Error code appears when using the meat probe/food probe; cooking stops.
Meat Probe Sensor Fault
F20
Display shows communication error; oven functions disabled.
Communication Failure Between UI Board and Main Control Board
F21
Touchscreen or touch keys behave erratically, exhibit ghost presses, or show no response.
Capacitive Touch Panel Fault
F30
Oven stops and displays an error when using the steam or moisture-assist function.
Steam Generator / Humidity System Fault
F40
Oven trips household breaker or RCD when heating starts.
Earth Leakage / Short Circuit in Heating Circuit
F50
Oven beeps and shows a door error; it will not start cooking.
Door Switch / Door Closed Detection Fault
Symptom
Control panel buttons or knobs become very hot during use.
Front Panel Overheating
Symptom
Excessive heat felt on the control panel or surrounding cabinetry during use.
Cooling Airflow / Ventilation Problem
Symptom
New Brandt oven emits a strong chemical or plastic smell during its first uses.
Initial Manufacturing Residue Burn-off
Symptom
Oven door will not close fully; heat escapes around the door.
Door Alignment / Hinge or Seal Failure
Symptom
Oven emits a high-pitched buzzing or humming noise from the control area.
Electrical Noise from Transformer or Relays
Symptom
Oven glass door gets extremely hot to the touch during normal baking.
Door Insulation / Glass Assembly Issue
Symptom
Oven heats, but the temperature is inaccurate (too hot or too cold) without showing an error.
Temperature Calibration / Sensor Drift
Symptom
Oven light, fan, and display work, but the oven will not start heating when 'Start' is pressed.
Control Logic / Start Inhibit Condition
Symptom
Oven makes a loud rattling or scraping noise when the fan is running.
Convection Fan Mechanical Noise
Symptom
Oven not heating at all; no error code displayed.
Global Heating Failure Without Diagnostic Code
Symptom
Oven produces smoke and a burning smell during normal cooking (not first use).
Grease Ignition / Contamination on Heating Elements
Symptom
Oven trips breaker or blows fuse immediately when turned on (even before heating).
Short Circuit in Mains Input or Control Circuit
Symptom
Pyrolytic self-clean leaves white residue or does not clean properly.
Ineffective Pyrolytic Cleaning
Symptom
The oven display flickers or dims when the heating elements switch on.
Voltage Drop / Power Supply Instability
Symptom
The oven interior light stays on all the time, even when the door is closed and the oven is off.
Stuck Lamp Control / Door Switch Fault
Symptom
The timer counts down, but the oven does not heat (timer mode only).
Timer-Only Operation Misunderstood
Symptom
Water or condensation dripping from the oven door or vent after cooking.
Condensation Management / Drainage Issue
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| F01 |
Oven does not heat in any mode; display and fan operate normally.
|
Main Heating Element Circuit Failure | View Details |
| F02 |
Oven overheats; temperature is far above the setpoint, and food burns quickly.
|
Temperature Regulation Failure (Thermostat / Sensor Fault) | View Details |
| F03 |
Oven does not reach the set temperature, has a very long preheat time, and produces undercooked food.
|
Insufficient Heating / Partial Element Failure | View Details |
| F04 |
The oven display shows an error, the cooling fan runs continuously, and the oven will not start.
|
Cooling System / Overtemperature Protection Fault | View Details |
| F05 |
Oven display is on, but keys or rotary selector do not respond.
|
User Interface/Keypad Communication Error | View Details |
| F06 |
Oven display completely dead, no lights or response.
|
Power Supply/Low Voltage Board Failure | View Details |
| F07 |
Oven door remains locked after cycle, or locks immediately on power-up.
|
Door Lock Mechanism/Lock Sensor Fault | View Details |
| F08 |
Pyrolytic self-cleaning cycle will not start; an error is displayed.
|
Pyrolytic Cycle Safety Fault | View Details |
| F09 |
Oven fan does not run in fan-assisted modes, leading to uneven cooking.
|
Convection Fan Motor Failure | View Details |
| F10 |
Grill function not working, while other modes heat normally.
|
Grill Heating Element Circuit Failure | View Details |
| F11 |
Interior light does not work, but the oven otherwise functions normally.
|
Oven Lamp Circuit Failure | View Details |
| F12 |
Clock cannot be set, and the oven will not start any cooking program.
|
Clock/Timer Configuration Lockout | View Details |
| F13 |
Display shows sensor error, and the oven stops heating mid-cycle.
|
Cavity Temperature Sensor Open Circuit | View Details |
| F14 |
Display shows sensor error, and the oven overheats or never reaches the set temperature.
|
Cavity Temperature Sensor Short Circuit | View Details |
| F15 |
Error code appears when using the meat probe/food probe; cooking stops.
|
Meat Probe Sensor Fault | View Details |
| F20 |
Display shows communication error; oven functions disabled.
|
Communication Failure Between UI Board and Main Control Board | View Details |
| F21 |
Touchscreen or touch keys behave erratically, exhibit ghost presses, or show no response.
|
Capacitive Touch Panel Fault | View Details |
| F30 |
Oven stops and displays an error when using the steam or moisture-assist function.
|
Steam Generator / Humidity System Fault | View Details |
| F40 |
Oven trips household breaker or RCD when heating starts.
|
Earth Leakage / Short Circuit in Heating Circuit | View Details |
| F50 |
Oven beeps and shows a door error; it will not start cooking.
|
Door Switch / Door Closed Detection Fault | View Details |
| – |
Control panel buttons or knobs become very hot during use.
|
Front Panel Overheating | View Details |
| – |
Excessive heat felt on the control panel or surrounding cabinetry during use.
|
Cooling Airflow / Ventilation Problem | View Details |
| – |
New Brandt oven emits a strong chemical or plastic smell during its first uses.
|
Initial Manufacturing Residue Burn-off | View Details |
| – |
Oven door will not close fully; heat escapes around the door.
|
Door Alignment / Hinge or Seal Failure | View Details |
| – |
Oven emits a high-pitched buzzing or humming noise from the control area.
|
Electrical Noise from Transformer or Relays | View Details |
| – |
Oven glass door gets extremely hot to the touch during normal baking.
|
Door Insulation / Glass Assembly Issue | View Details |
| – |
Oven heats, but the temperature is inaccurate (too hot or too cold) without showing an error.
|
Temperature Calibration / Sensor Drift | View Details |
| – |
Oven light, fan, and display work, but the oven will not start heating when 'Start' is pressed.
|
Control Logic / Start Inhibit Condition | View Details |
| – |
Oven makes a loud rattling or scraping noise when the fan is running.
|
Convection Fan Mechanical Noise | View Details |
| – |
Oven not heating at all; no error code displayed.
|
Global Heating Failure Without Diagnostic Code | View Details |
| – |
Oven produces smoke and a burning smell during normal cooking (not first use).
|
Grease Ignition / Contamination on Heating Elements | View Details |
| – |
Oven trips breaker or blows fuse immediately when turned on (even before heating).
|
Short Circuit in Mains Input or Control Circuit | View Details |
| – |
Pyrolytic self-clean leaves white residue or does not clean properly.
|
Ineffective Pyrolytic Cleaning | View Details |
| – |
The oven display flickers or dims when the heating elements switch on.
|
Voltage Drop / Power Supply Instability | View Details |
| – |
The oven interior light stays on all the time, even when the door is closed and the oven is off.
|
Stuck Lamp Control / Door Switch Fault | View Details |
| – |
The timer counts down, but the oven does not heat (timer mode only).
|
Timer-Only Operation Misunderstood | View Details |
| – |
Water or condensation dripping from the oven door or vent after cooking.
|
Condensation Management / Drainage Issue | View Details |
No matching codes found
Advertisements