Bush
Bush Ovens Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Bush electric oven will not heat at all; the display is on and the fan may run, but the cavity stays cold.
Main Oven Heating Circuit Failure
E02
Bush oven overheats, burning food quickly; the display may show E02, and the fan may run continuously.
Oven Temperature Regulation Failure
E03
Bush oven display shows E03, and the oven will not start a cooking cycle.
Oven Temperature Sensor Open/Short Circuit
E04
Bush oven shows E04, and the cooling fan or oven fan does not run, or the oven shuts down shortly after starting.
Cooling or Convection Fan Motor Failure
E05
Bush oven displays E05, and the grill function does not operate or cuts out quickly.
Grill Heating Circuit Fault
E06
Bush oven shows E06, and the clock/timer functions erratically, or the oven will not start because the timer cannot be set.
Electronic Timer/Clock Module Fault
E07
Bush oven displays E07, and the door lock symbol may flash; the oven will not start a pyrolytic/self-clean cycle (on models with this feature).
Door Lock Mechanism Fault
E08
Bush oven displays E08, and the cooling fan runs continuously, or the oven shuts down due to overheating of the control area.
Control Panel Overheat or Cooling System Fault
E09
Bush oven displays E09, and some or all functions are disabled; this may follow a power surge or tripped breaker.
Main Control Board (PCB) Fault
E10
Bush oven displays E10, and the display or touch controls do not respond correctly.
User Interface / Touch Control Fault
E11
Bush oven displays E11, and the fan-assisted mode does not work, though conventional heating may still function.
Convection Fan Heating Circuit Fault
E12
Bush oven displays E12 and trips the household circuit breaker when a cooking function is selected.
Earth Leakage or Short Circuit in Heating Circuit
E13
Bush oven displays E13, and the interior light does not work; some models may still heat.
Oven Lamp Circuit Fault
E14
Bush oven displays E14, and the timer cannot be set or loses time rapidly.
Clock Power Supply or Timekeeping Fault
E15
Bush oven displays E15 and beeps continuously; some buttons may not respond.
Keypad Stuck or Shorted
E16
Bush oven displays E16 and will not start; this may indicate an internal communication error between boards.
Communication Error Between Main PCB and User Interface
E17
Bush oven displays E17, and the cooling fan runs even when the oven is off, or the oven will not start due to an over-temperature warning.
Over-Temperature Safety Cut-Out Activated
E18
Bush oven displays E18, and the grill or oven cycles off prematurely, not reaching the set temperature.
Faulty Cavity Thermostat or Sensor Calibration
E19
Bush oven displays E19, and the interior light and fan work, but there is no heating on any function.
Relay or Power Distribution Failure on PCB
E20
Bush oven displays E20, and the fan runs, but the temperature does not rise properly in fan-assisted mode.
Partial Failure of Fan Oven Element
Symptom
Bush oven clock loses time or resets when the oven is used at high temperatures.
Clock Power Dropout Due to Heat
Symptom
Bush oven control knobs become very hot to touch during use.
Excessive Heat at Control Panel
Symptom
Bush oven display is blank, and the oven is completely dead.
No Power / Dead Appliance
Symptom
Bush oven display works, but buttons or knobs do not respond or change settings intermittently.
Unresponsive Controls
Symptom
Bush oven does not heat at all; no error code is displayed, but the clock and lights may still work.
No-Heat Condition Without Error Code
Symptom
Bush oven door glass is loose, rattling, or has fallen out.
Door Glass Mounting Failure
Symptom
Bush oven door will not close properly; heat escapes, and cooking is uneven.
Door Misalignment or Hinge Wear
Symptom
Bush oven door will not open after cooking; no self-clean cycle is in use.
Door Latch Jammed
Symptom
Bush oven emits a strong electrical or plastic burning smell when heating.
Overheating Electrical Components
Symptom
Bush oven fan is noisy, rattling, or scraping during operation.
Fan Noise / Mechanical Interference
Symptom
Bush oven fan is not working; the oven may still heat, but cooking is uneven.
Convection Fan Motor Failure
Symptom
Bush oven glass door steams up excessively, and water drips from the door.
Excessive Condensation
Symptom
Bush oven grill works, but the main oven does not heat.
Main Oven Element or Circuit Failure
Symptom
Bush oven heats but takes a very long time to reach temperature or never reaches the set temperature.
Underheating / Extended Preheat Time
Symptom
Bush oven interior light is not working, but the oven heats normally.
Oven Lamp Failure
Symptom
Bush oven is emitting smoke or a burning smell during normal cooking.
Excessive Smoke / Burning Odour
Symptom
Bush oven main oven works, but the grill does not heat.
Grill Element or Circuit Failure
Symptom
Bush oven makes a buzzing or humming noise from the control area when heating.
Transformer or Relay Noise
Symptom
Bush oven makes a loud bang or pop and then stops heating.
Element Rupture
Symptom
Bush oven overheats and burns food even at low settings; no error code is displayed.
Runaway Temperature / Overheating
Symptom
Bush oven shelves tilt or slide out too easily when pulling food out.
Shelf Support Wear or Deformation
Symptom
Bush oven temperature is uneven; food burns at the back and is undercooked at the front.
Uneven Heat Distribution
Symptom
Bush oven timer works, but the oven will not start; the display shows manual mode, but there is no heating.
Timer Not Allowing Power to Oven
Symptom
Bush oven trips the RCD or fuse when turned on; no error code is displayed.
Electrical Short or Earth Leakage
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Bush electric oven will not heat at all; the display is on and the fan may run, but the cavity stays cold.
|
Main Oven Heating Circuit Failure | View Details |
| E02 |
Bush oven overheats, burning food quickly; the display may show E02, and the fan may run continuously.
|
Oven Temperature Regulation Failure | View Details |
| E03 |
Bush oven display shows E03, and the oven will not start a cooking cycle.
|
Oven Temperature Sensor Open/Short Circuit | View Details |
| E04 |
Bush oven shows E04, and the cooling fan or oven fan does not run, or the oven shuts down shortly after starting.
|
Cooling or Convection Fan Motor Failure | View Details |
| E05 |
Bush oven displays E05, and the grill function does not operate or cuts out quickly.
|
Grill Heating Circuit Fault | View Details |
| E06 |
Bush oven shows E06, and the clock/timer functions erratically, or the oven will not start because the timer cannot be set.
|
Electronic Timer/Clock Module Fault | View Details |
| E07 |
Bush oven displays E07, and the door lock symbol may flash; the oven will not start a pyrolytic/self-clean cycle (on models with this feature).
|
Door Lock Mechanism Fault | View Details |
| E08 |
Bush oven displays E08, and the cooling fan runs continuously, or the oven shuts down due to overheating of the control area.
|
Control Panel Overheat or Cooling System Fault | View Details |
| E09 |
Bush oven displays E09, and some or all functions are disabled; this may follow a power surge or tripped breaker.
|
Main Control Board (PCB) Fault | View Details |
| E10 |
Bush oven displays E10, and the display or touch controls do not respond correctly.
|
User Interface / Touch Control Fault | View Details |
| E11 |
Bush oven displays E11, and the fan-assisted mode does not work, though conventional heating may still function.
|
Convection Fan Heating Circuit Fault | View Details |
| E12 |
Bush oven displays E12 and trips the household circuit breaker when a cooking function is selected.
|
Earth Leakage or Short Circuit in Heating Circuit | View Details |
| E13 |
Bush oven displays E13, and the interior light does not work; some models may still heat.
|
Oven Lamp Circuit Fault | View Details |
| E14 |
Bush oven displays E14, and the timer cannot be set or loses time rapidly.
|
Clock Power Supply or Timekeeping Fault | View Details |
| E15 |
Bush oven displays E15 and beeps continuously; some buttons may not respond.
|
Keypad Stuck or Shorted | View Details |
| E16 |
Bush oven displays E16 and will not start; this may indicate an internal communication error between boards.
|
Communication Error Between Main PCB and User Interface | View Details |
| E17 |
Bush oven displays E17, and the cooling fan runs even when the oven is off, or the oven will not start due to an over-temperature warning.
|
Over-Temperature Safety Cut-Out Activated | View Details |
| E18 |
Bush oven displays E18, and the grill or oven cycles off prematurely, not reaching the set temperature.
|
Faulty Cavity Thermostat or Sensor Calibration | View Details |
| E19 |
Bush oven displays E19, and the interior light and fan work, but there is no heating on any function.
|
Relay or Power Distribution Failure on PCB | View Details |
| E20 |
Bush oven displays E20, and the fan runs, but the temperature does not rise properly in fan-assisted mode.
|
Partial Failure of Fan Oven Element | View Details |
| – |
Bush oven clock loses time or resets when the oven is used at high temperatures.
|
Clock Power Dropout Due to Heat | View Details |
| – |
Bush oven control knobs become very hot to touch during use.
|
Excessive Heat at Control Panel | View Details |
| – |
Bush oven display is blank, and the oven is completely dead.
|
No Power / Dead Appliance | View Details |
| – |
Bush oven display works, but buttons or knobs do not respond or change settings intermittently.
|
Unresponsive Controls | View Details |
| – |
Bush oven does not heat at all; no error code is displayed, but the clock and lights may still work.
|
No-Heat Condition Without Error Code | View Details |
| – |
Bush oven door glass is loose, rattling, or has fallen out.
|
Door Glass Mounting Failure | View Details |
| – |
Bush oven door will not close properly; heat escapes, and cooking is uneven.
|
Door Misalignment or Hinge Wear | View Details |
| – |
Bush oven door will not open after cooking; no self-clean cycle is in use.
|
Door Latch Jammed | View Details |
| – |
Bush oven emits a strong electrical or plastic burning smell when heating.
|
Overheating Electrical Components | View Details |
| – |
Bush oven fan is noisy, rattling, or scraping during operation.
|
Fan Noise / Mechanical Interference | View Details |
| – |
Bush oven fan is not working; the oven may still heat, but cooking is uneven.
|
Convection Fan Motor Failure | View Details |
| – |
Bush oven glass door steams up excessively, and water drips from the door.
|
Excessive Condensation | View Details |
| – |
Bush oven grill works, but the main oven does not heat.
|
Main Oven Element or Circuit Failure | View Details |
| – |
Bush oven heats but takes a very long time to reach temperature or never reaches the set temperature.
|
Underheating / Extended Preheat Time | View Details |
| – |
Bush oven interior light is not working, but the oven heats normally.
|
Oven Lamp Failure | View Details |
| – |
Bush oven is emitting smoke or a burning smell during normal cooking.
|
Excessive Smoke / Burning Odour | View Details |
| – |
Bush oven main oven works, but the grill does not heat.
|
Grill Element or Circuit Failure | View Details |
| – |
Bush oven makes a buzzing or humming noise from the control area when heating.
|
Transformer or Relay Noise | View Details |
| – |
Bush oven makes a loud bang or pop and then stops heating.
|
Element Rupture | View Details |
| – |
Bush oven overheats and burns food even at low settings; no error code is displayed.
|
Runaway Temperature / Overheating | View Details |
| – |
Bush oven shelves tilt or slide out too easily when pulling food out.
|
Shelf Support Wear or Deformation | View Details |
| – |
Bush oven temperature is uneven; food burns at the back and is undercooked at the front.
|
Uneven Heat Distribution | View Details |
| – |
Bush oven timer works, but the oven will not start; the display shows manual mode, but there is no heating.
|
Timer Not Allowing Power to Oven | View Details |
| – |
Bush oven trips the RCD or fuse when turned on; no error code is displayed.
|
Electrical Short or Earth Leakage | View Details |
No matching codes found
Advertisements