The grill cuts out shortly after switching on, or will not stay on, and an error is displayed in grill mode.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty grill safety thermostat, Poor ventilation around the oven, Failed cooling fan, Loose thermal sensor on the grill cavity

Safety: Turn off power and allow the grill area to cool completely.

Check ventilation: Ensure that the oven has the clearances specified by Falcon and that vents are not blocked by cabinetry or foil.
Inspect grill safety thermostat: Locate the Falcon grill safety thermostat (usually on the top of the cavity). Test for continuity at room temperature. If open and non-resettable, replace it.
Verify cooling fan operation: In grill mode, the cooling fan should run. If not, test and replace the Falcon cooling fan motor or thermostat as needed.
Check wiring: Inspect connections to the grill element and safety thermostat for heat damage. Repair or replace any burnt connectors.

Medium 3/5

Falcon grill safety thermostat

Check Price on Amazon

We may earn a commission from links on this page.