Hoover oven door will not close fully or sits unevenly, causing heat loss and poor cooking.

Safety first: Ensure the oven is cool before working on the door. Support the door to prevent it falling.

• Inspect hinges:
  • Open the door and check for excessive play or sagging.
  • Look for bent hinge arms or cracked hinge plates.
• Remove door:
  • On many Hoover models, open the door fully, flip the hinge locks, then close the door partially and lift it off.
  • Place the door on a soft surface.
• Replace hinges:
  • Unscrew the hinges from the door and fit new Hoover-compatible hinges.
  • Inspect and replace hinge receivers in the oven frame if worn.
• Reinstall and align:
  • Refit the door onto the hinges and close it to check alignment.
  • Adjust as needed by loosening and retightening mounting screws.