F94
Kenmore
Self-Clean Door Lock Fault
Oven displays F94; self-clean will not start or aborts
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door not fully closed, Faulty door lock switch, Failed lock motor, EOC sensing incorrect lock status
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before accessing internal components.
- Verify door closure: Ensure the door closes firmly and the latch engages. Adjust hinges if the door is loose or misaligned.
- Inspect door lock switch:
- Access the lock assembly and locate the lock status switch.
- Use a multimeter to check continuity with the door in locked and unlocked positions.
- If the switch does not change state, replace the door lock motor and switch assembly.
- Check wiring: Inspect harness from lock assembly to EOC for loose or damaged connectors. Repair as needed.
- Control board: If lock and wiring are good but F94 persists, the EOC may misread the lock status. Replace the electronic oven control if required.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Lock Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements