F3E0 error, oven will not heat or temperature is incorrect.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed oven sensor, damaged sensor harness, loose connector, failed EOC sensor circuit

Safety First: Turn off power at the circuit breaker before testing.

Access sensor: Remove the sensor mounting screws inside the oven and pull the sensor forward.
Measure resistance: Unplug the sensor and measure its resistance at room temperature (~1050–1100 Ω). Very high or very low readings indicate a bad sensor.
Inspect wiring: Check the harness and connectors between the sensor and control for damage.
Replace sensor: Install a new Maytag oven temperature sensor if the readings are out of range. If the sensor and wiring are good, replace the EOC.

Medium 3/5

Oven Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.