Oven displays E-54 and may not start or may shut down mid-cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Jammed bake or broil relay on main PCB, Burned relay contacts, PCB damage from overheating, Shorted heating element drawing excessive current

Safety first: Turn off power at the breaker immediately. Do not use the oven until the issue is resolved.

Check elements:
- Visually inspect bake and broil elements for visible breaks, blisters, or arcing marks.
Inspect PCB:
- Remove the rear panel and inspect the main relay board for burned relays or traces.
Test elements (advanced):
- Disconnect one wire from each element and measure resistance; compare to service specifications.
- Replace any element that is shorted or significantly out of specification.
Replace main PCB: If relays are jammed or the board is burned, replace the main relay control board.
Due to fire risk, professional service is strongly recommended.

Professional Required 5/5

Main Relay Control Board

Check Price on Amazon

We may earn a commission from links on this page.