E13
Tristar
Door Switch / Door Sensor Fault
Oven shows E13 and interior light does not turn on when door is opened.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door switch, Misaligned door latch, Broken door switch actuator
How to Fix / Troubleshooting
Safety first: Disconnect the oven from mains power before working on the door switch.
- Check door closure: Ensure the door closes fully and evenly. Bent hinges or a warped door can prevent the switch from actuating.
- Locate door switch: On many Tristar ovens, the door switch is behind the front frame near the latch. Remove the front trim or side panel to access it.
- Test switch: Disconnect the wires and test the switch with a multimeter. It should change from open to closed (or vice versa) when the door is opened/closed.
- Adjust or replace: If the switch does not change state reliably, adjust its position slightly so the door actuator engages it fully. If still faulty, replace the door switch / door sensor.
Reassemble and test that the light and oven functions respond correctly to door opening and closing, and that E13 is cleared.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements