The top heat (conventional) function does not work; food browns only from below, and F08 appears.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off the power at the breaker and confirm the oven is off before accessing the top area.
Step-by-step checks:
- Visual check: Inspect the top element for cracks, blisters, or burn marks.
- Continuity measurement: From the rear, disconnect the top element leads and measure resistance. Replace the element if it shows an open circuit.
- Check wiring: Ensure wires are not pinched by the oven casing and that their insulation is intact. Replace any damaged sections with heat-resistant cable.
- Replace top element: Remove internal mounting screws or clips, slide out the old element, and install the new V-ZUG top heating element. Refit all fasteners and securely reconnect the wiring.
When to call a technician: If the element and wiring are found to be in good condition but F08 persists, the power module or control board may require replacement by an authorized technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.