Speck Pumpen
Imbalance or Poor Mounting
Pump vibrates excessively, causing pipes to shake and noise to transmit through the pool system.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Debris stuck in impeller causing imbalance, Misaligned pump and piping, Pump not securely bolted to base, Collapsed or missing rubber mounting pads
How to Fix / Troubleshooting
Safety first: Turn off power and relieve system pressure before working on the pump.
Check impeller and internals:
- Open the pump housing and inspect the Speck impeller for debris or damage. Clean thoroughly.
- Check that the diffuser and volute are correctly seated and not cracked.
Secure mounting:
- Ensure the pump base is flat and rigid. Bolt the pump securely using appropriate anchors.
- Install or replace rubber anti-vibration pads between the pump base and mounting surface.
- Support long pipe runs with proper hangers or brackets to reduce transmitted vibration.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Speck pump base and anti-vibration mounting kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements