E5 displayed; the oven may not start or may shut off mid-cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Low or high line voltage, loose power connections at the terminal block, damaged power cord, faulty EOC power supply circuit

Safety first: Turn off power at the breaker. High voltage is present; if you are not experienced, contact a professional.

Inspect terminal block:
- Remove the rear cover at the power cord entry point.
- Check for loose screws, burnt wires, or melted plastic.
- Tighten connections and replace any burnt wiring or the terminal block if damaged.
Verify line voltage:
- Use a multimeter to confirm 240 VAC (or the appropriate voltage) at the terminal block.
- If the voltage is out of range, contact an electrician.
Control board:
- If the supply is correct but E5 persists, the EOC's internal power supply may be faulty; replace the electronic oven control board.

Professional Required 5/5

Range Terminal Block

Check Price on Amazon

We may earn a commission from links on this page.