GE Door Hinge or Gasket Failure

Oven door will not close fully; heat escapes around the door.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent or worn door hinges, Broken hinge springs, Deformed door gasket, Obstruction on the door frame

Safety: Ensure the oven is cool before working on the door.

Check for obstructions: Inspect the door frame and gasket area for pans, racks, or debris that may be preventing full closure.
Inspect gasket: Look for tears, gaps, or hardened sections in the door gasket. Replace it if damaged.
Hinge test: Open the door halfway and see if it stays in place. If it drops or feels loose, the hinges or springs are worn.
Replace hinges: Remove the door according to GE instructions (usually open slightly and lift off the hinges). Replace both hinges as a set.

Medium 3/5

Oven Door Hinge Assembly

Check Price on Amazon

We may earn a commission from links on this page.