Glem Gas
Glem Gas Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
The cooktop display shows E0, and none of the touch controls respond.
Touch Control Panel Communication Fault
E1
The cooktop or range display shows E1, and burners will not heat.
Power Supply / Line Voltage Fault
E2
The induction or electric cooktop shows E2 and shuts down the affected zone.
Cooktop Overtemperature Protection Activated
E3
An induction cooktop zone shows E3 and does not heat properly.
Induction Power Module Overcurrent / IGBT Protection
E4
The induction cooktop displays E4 when a pan is placed on the zone.
Pan Detection / Frequency Error
E5
The cooktop shows E5 and shuts down after a short time of use.
Cooling Fan or Internal Overheating Fault
E6
The cooktop or range display shows E6, and all zones are disabled.
NTC Temperature Sensor Fault (Open or Shorted)
E7
The induction cooktop shows E7, and one or more zones are inoperative.
Communication Error Between User Interface and Power Module
E8
Induction cooktop shows E8, and the affected zone cannot be activated.
Induction Coil or Current Sensor Fault
E9
Cooktop shows E9 and beeps; all zones are disabled.
Internal Configuration / EEPROM Error
Err
Cooktop or range briefly shows 'Err' when attempting to start a burner
Invalid Setting or Safety Lock Active
F0
Range oven display shows F0 and beeps intermittently.
Stuck or Shorted Oven Keypad
F1
Oven display shows F1 and beeps continuously until power is removed.
Electronic Oven Control Failure
F2
Oven shows F2 during or after a high-temperature cycle (e.g., grill or cleaning).
Oven Overtemperature Fault
F3
Oven display shows F3, and cooking is disabled.
Oven Temperature Sensor Open Circuit
F4
Oven display shows F4 and will not start a cooking cycle.
Oven Temperature Sensor Short Circuit
F5
Oven shows F5, and the door lock will not operate during the cleaning cycle.
Oven Door Lock Circuit Fault
F6
Oven display shows F6, and none of the oven functions start.
Oven Control to Touch Panel Communication Error
F7
Oven shows F7 and may start or stop unexpectedly.
Function Key Short or Matrix Error
F8
Oven display shows F8 and cooling fan runs continuously
Cooling Fan or Overheat Sensor Fault
F9
Oven shows F9 and door remains locked after cleaning cycle
Door Lock Not Releasing / Lock Position Error
Symptom
Clock / timer not working or display blank but burners work
Electronic Timer Power or Internal Failure
Symptom
Continuous clicking from igniters even when all burner knobs are off
Stuck Ignition Switch or Moisture in Ignition Circuit
Symptom
Control knobs are hard to turn or feel stuck.
Valve or Switch Shaft Binding
Symptom
Cooktop glass or enamel surface cracked or chipped
Top Surface Mechanical Damage
Symptom
Electric hotplate or radiant zone not heating at all
Open Heating Element or Control Failure
Symptom
Electric hotplate or radiant zone overheats and does not regulate temperature
Failed Energy Regulator / Infinite Switch
Symptom
Electric oven heats but temperature is inaccurate or unstable.
Temperature Regulation / Sensor or Thermostat Fault
Symptom
Electric oven not heating on any function (bake, grill, fan).
Main Power or Selector Circuit Failure
Symptom
Excessive heat felt on control panel or surrounding cabinets during oven use
Cooling or Ventilation Deficiency
Symptom
Gas burner clicks but does not light, or lights only after several attempts
Poor Gas Flow or Ignition Positioning
Symptom
Gas burner flame goes out when knob is released
Flame Failure Device (Thermocouple) Not Holding
Symptom
Gas burner flame is yellow, noisy, or lifting off the burner
Incorrect Air–Gas Mixture or Contaminated Burner
Symptom
Gas burner will not ignite, no clicking sound from igniter
Ignition System Power or Switch Failure
Symptom
Gas oven lights but goes out after a few seconds.
Oven Flame Supervision (Thermocouple) Not Holding
Symptom
Gas oven will not ignite; no clicking or pilot flame.
Gas Oven Ignition System Failure
Symptom
Oven door glass is loose, rattling, or cracked.
Door Glass Assembly Damage
Symptom
Oven door will not close fully or seal properly.
Door Hinge or Gasket Misalignment
Symptom
Oven fan not running in fan-forced mode.
Convection Fan Motor or Circuit Failure
Symptom
Oven light not working even after bulb replacement.
Oven Lamp Circuit Failure
Symptom
Oven turns off before reaching set temperature or cuts out intermittently
Overheat Protection or Poor Ventilation
Symptom
Strong gas smell around range or cooktop during use.
Gas Leak or Incomplete Combustion
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
The cooktop display shows E0, and none of the touch controls respond.
|
Touch Control Panel Communication Fault | View Details |
| E1 |
The cooktop or range display shows E1, and burners will not heat.
|
Power Supply / Line Voltage Fault | View Details |
| E2 |
The induction or electric cooktop shows E2 and shuts down the affected zone.
|
Cooktop Overtemperature Protection Activated | View Details |
| E3 |
An induction cooktop zone shows E3 and does not heat properly.
|
Induction Power Module Overcurrent / IGBT Protection | View Details |
| E4 |
The induction cooktop displays E4 when a pan is placed on the zone.
|
Pan Detection / Frequency Error | View Details |
| E5 |
The cooktop shows E5 and shuts down after a short time of use.
|
Cooling Fan or Internal Overheating Fault | View Details |
| E6 |
The cooktop or range display shows E6, and all zones are disabled.
|
NTC Temperature Sensor Fault (Open or Shorted) | View Details |
| E7 |
The induction cooktop shows E7, and one or more zones are inoperative.
|
Communication Error Between User Interface and Power Module | View Details |
| E8 |
Induction cooktop shows E8, and the affected zone cannot be activated.
|
Induction Coil or Current Sensor Fault | View Details |
| E9 |
Cooktop shows E9 and beeps; all zones are disabled.
|
Internal Configuration / EEPROM Error | View Details |
| Err |
Cooktop or range briefly shows 'Err' when attempting to start a burner
|
Invalid Setting or Safety Lock Active | View Details |
| F0 |
Range oven display shows F0 and beeps intermittently.
|
Stuck or Shorted Oven Keypad | View Details |
| F1 |
Oven display shows F1 and beeps continuously until power is removed.
|
Electronic Oven Control Failure | View Details |
| F2 |
Oven shows F2 during or after a high-temperature cycle (e.g., grill or cleaning).
|
Oven Overtemperature Fault | View Details |
| F3 |
Oven display shows F3, and cooking is disabled.
|
Oven Temperature Sensor Open Circuit | View Details |
| F4 |
Oven display shows F4 and will not start a cooking cycle.
|
Oven Temperature Sensor Short Circuit | View Details |
| F5 |
Oven shows F5, and the door lock will not operate during the cleaning cycle.
|
Oven Door Lock Circuit Fault | View Details |
| F6 |
Oven display shows F6, and none of the oven functions start.
|
Oven Control to Touch Panel Communication Error | View Details |
| F7 |
Oven shows F7 and may start or stop unexpectedly.
|
Function Key Short or Matrix Error | View Details |
| F8 |
Oven display shows F8 and cooling fan runs continuously
|
Cooling Fan or Overheat Sensor Fault | View Details |
| F9 |
Oven shows F9 and door remains locked after cleaning cycle
|
Door Lock Not Releasing / Lock Position Error | View Details |
| – |
Clock / timer not working or display blank but burners work
|
Electronic Timer Power or Internal Failure | View Details |
| – |
Continuous clicking from igniters even when all burner knobs are off
|
Stuck Ignition Switch or Moisture in Ignition Circuit | View Details |
| – |
Control knobs are hard to turn or feel stuck.
|
Valve or Switch Shaft Binding | View Details |
| – |
Cooktop glass or enamel surface cracked or chipped
|
Top Surface Mechanical Damage | View Details |
| – |
Electric hotplate or radiant zone not heating at all
|
Open Heating Element or Control Failure | View Details |
| – |
Electric hotplate or radiant zone overheats and does not regulate temperature
|
Failed Energy Regulator / Infinite Switch | View Details |
| – |
Electric oven heats but temperature is inaccurate or unstable.
|
Temperature Regulation / Sensor or Thermostat Fault | View Details |
| – |
Electric oven not heating on any function (bake, grill, fan).
|
Main Power or Selector Circuit Failure | View Details |
| – |
Excessive heat felt on control panel or surrounding cabinets during oven use
|
Cooling or Ventilation Deficiency | View Details |
| – |
Gas burner clicks but does not light, or lights only after several attempts
|
Poor Gas Flow or Ignition Positioning | View Details |
| – |
Gas burner flame goes out when knob is released
|
Flame Failure Device (Thermocouple) Not Holding | View Details |
| – |
Gas burner flame is yellow, noisy, or lifting off the burner
|
Incorrect Air–Gas Mixture or Contaminated Burner | View Details |
| – |
Gas burner will not ignite, no clicking sound from igniter
|
Ignition System Power or Switch Failure | View Details |
| – |
Gas oven lights but goes out after a few seconds.
|
Oven Flame Supervision (Thermocouple) Not Holding | View Details |
| – |
Gas oven will not ignite; no clicking or pilot flame.
|
Gas Oven Ignition System Failure | View Details |
| – |
Oven door glass is loose, rattling, or cracked.
|
Door Glass Assembly Damage | View Details |
| – |
Oven door will not close fully or seal properly.
|
Door Hinge or Gasket Misalignment | View Details |
| – |
Oven fan not running in fan-forced mode.
|
Convection Fan Motor or Circuit Failure | View Details |
| – |
Oven light not working even after bulb replacement.
|
Oven Lamp Circuit Failure | View Details |
| – |
Oven turns off before reaching set temperature or cuts out intermittently
|
Overheat Protection or Poor Ventilation | View Details |
| – |
Strong gas smell around range or cooktop during use.
|
Gas Leak or Incomplete Combustion | View Details |
No matching codes found
Advertisements