Hansa Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Electronic control shows E0, and the oven or burners do not respond to touch or knob commands.
Control Panel Communication Fault
E1
Display shows E1, and the oven will not heat or shuts down shortly after starting.
Oven Temperature Sensor (NTC) Fault
E2
E2 error on display; oven overheats or shuts off with the fan running continuously.
Oven Overtemperature / Safety Thermostat Trip
E3
E3 error appears, and the oven does not reach the set temperature or cycles erratically.
Oven Temperature Calibration / Sensor Range Error
E4
E4 error on induction cooktop zones; the affected zone will not heat.
Induction Coil Overtemperature / Pan Detection Fault
E5
E5 error on induction cooktop; the cooktop shuts down or will not start.
Induction Power Module Overvoltage/Undervoltage
E6
E6 error on induction cooktop; one or more zones are disabled.
Induction IGBT / Power Stage Fault
E7
E7 error on induction cooktop; touch controls are unresponsive or random beeping occurs.
Touch Control Panel / User Interface Fault
E8
E8 error on induction cooktop, usually associated with overheating or blocked ventilation.
Induction Module Overheat Protection
E9
E9 error on induction cooktop; the unit may shut down completely.
Internal Cooktop Electronics Fault
F1
F1 error on oven display, with beeping and the oven disabled.
Keypad Stuck or Shorted
F2
F2 error on oven display, often accompanied by overheating or a failure to regulate temperature.
Oven Overtemperature Detected
F3
F3 error on oven display; the oven will not start heating.
Open Temperature Sensor Circuit
F4
F4 error on oven display; oven may overheat or not heat correctly.
Shorted Temperature Sensor Circuit
F5
F5 error on oven display; grill or top element not working.
Grill Element or Circuit Fault
F6
F6 error on oven display; fan-assisted modes not working properly.
Convection Fan or Fan Element Fault
F7
F7 error on oven display; clock/timer not functioning, and the oven may not start.
Electronic Timer/Clock Module Fault
F8
F8 error on oven display; cooling fan runs continuously or the oven shuts down.
Cooling Fan or Temperature Protection Fault
F9
F9 error on oven display; the door lock symbol may flash, and self-clean will not start (on pyrolytic models).
Door Lock Mechanism Fault
LOC
Display shows LOC or a key symbol; oven controls do not respond.
Child Lock/Control Lock Activated
—
Display shows dashes or blinking time, and the oven will not start.
Clock Not Set/Standby State
Symptom
Clock and display are dead, but burners/oven still work (on some models).
Display / Timer Power Fault
Symptom
Continuous clicking from gas igniters, even when burners are off.
Stuck Ignition Switch or Shorted Ignition Module
Symptom
Control knobs are hard to turn or feel loose and wobbly.
Worn Knobs or Valve Shafts
Symptom
Cooktop glass is cracked or shattered.
Ceramic Glass Surface Damage
Symptom
Cooktop or control panel gets excessively hot during oven use.
Cooling / Insulation Deficiency
Symptom
Electric hotplate or radiant ceramic zone does not heat.
Open Heating Element or Control Fault
Symptom
Excessive steam escaping from oven door or control panel area.
Steam Venting / Seal Issue
Symptom
Gas burner flame is yellow, noisy, or lifting off the burner.
Incorrect Gas-Air Mixture / Burner Adjustment Fault
Symptom
Gas burner will not ignite, or the flame goes out immediately after releasing the knob.
Gas Burner Ignition/Flame Supervision Failure
Symptom
Oven does not heat in any mode (no error code displayed).
No Power to Heating Circuit
Symptom
Oven door does not close properly or heat escapes around the door.
Door Hinge / Seal Misalignment
Symptom
Oven door glass is loose, rattling, or has condensation between panes.
Door Glass Assembly Fault
Symptom
Oven fan is very noisy, rattling, or scraping during operation.
Worn or Obstructed Convection Fan
Symptom
Oven heats but cannot reach set temperature or takes very long to preheat.
Partial Heating / Element Degradation
Symptom
Oven interior light does not work, but the oven heats normally.
Oven Lamp Circuit Fault
Symptom
Oven light works but fan and heating do not start when a function is selected.
Function Selector Switch Failure
Symptom
Range trips the circuit breaker or RCD when the oven or cooktop is turned on.
Electrical Short or Earth Leakage
Symptom
Strong burning smell or smoke from oven during normal cooking (not first use).
Grease Build-up / Element Contamination
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Electronic control shows E0, and the oven or burners do not respond to touch or knob commands.
|
Control Panel Communication Fault | View Details |
| E1 |
Display shows E1, and the oven will not heat or shuts down shortly after starting.
|
Oven Temperature Sensor (NTC) Fault | View Details |
| E2 |
E2 error on display; oven overheats or shuts off with the fan running continuously.
|
Oven Overtemperature / Safety Thermostat Trip | View Details |
| E3 |
E3 error appears, and the oven does not reach the set temperature or cycles erratically.
|
Oven Temperature Calibration / Sensor Range Error | View Details |
| E4 |
E4 error on induction cooktop zones; the affected zone will not heat.
|
Induction Coil Overtemperature / Pan Detection Fault | View Details |
| E5 |
E5 error on induction cooktop; the cooktop shuts down or will not start.
|
Induction Power Module Overvoltage/Undervoltage | View Details |
| E6 |
E6 error on induction cooktop; one or more zones are disabled.
|
Induction IGBT / Power Stage Fault | View Details |
| E7 |
E7 error on induction cooktop; touch controls are unresponsive or random beeping occurs.
|
Touch Control Panel / User Interface Fault | View Details |
| E8 |
E8 error on induction cooktop, usually associated with overheating or blocked ventilation.
|
Induction Module Overheat Protection | View Details |
| E9 |
E9 error on induction cooktop; the unit may shut down completely.
|
Internal Cooktop Electronics Fault | View Details |
| F1 |
F1 error on oven display, with beeping and the oven disabled.
|
Keypad Stuck or Shorted | View Details |
| F2 |
F2 error on oven display, often accompanied by overheating or a failure to regulate temperature.
|
Oven Overtemperature Detected | View Details |
| F3 |
F3 error on oven display; the oven will not start heating.
|
Open Temperature Sensor Circuit | View Details |
| F4 |
F4 error on oven display; oven may overheat or not heat correctly.
|
Shorted Temperature Sensor Circuit | View Details |
| F5 |
F5 error on oven display; grill or top element not working.
|
Grill Element or Circuit Fault | View Details |
| F6 |
F6 error on oven display; fan-assisted modes not working properly.
|
Convection Fan or Fan Element Fault | View Details |
| F7 |
F7 error on oven display; clock/timer not functioning, and the oven may not start.
|
Electronic Timer/Clock Module Fault | View Details |
| F8 |
F8 error on oven display; cooling fan runs continuously or the oven shuts down.
|
Cooling Fan or Temperature Protection Fault | View Details |
| F9 |
F9 error on oven display; the door lock symbol may flash, and self-clean will not start (on pyrolytic models).
|
Door Lock Mechanism Fault | View Details |
| LOC |
Display shows LOC or a key symbol; oven controls do not respond.
|
Child Lock/Control Lock Activated | View Details |
| — |
Display shows dashes or blinking time, and the oven will not start.
|
Clock Not Set/Standby State | View Details |
| – |
Clock and display are dead, but burners/oven still work (on some models).
|
Display / Timer Power Fault | View Details |
| – |
Continuous clicking from gas igniters, even when burners are off.
|
Stuck Ignition Switch or Shorted Ignition Module | View Details |
| – |
Control knobs are hard to turn or feel loose and wobbly.
|
Worn Knobs or Valve Shafts | View Details |
| – |
Cooktop glass is cracked or shattered.
|
Ceramic Glass Surface Damage | View Details |
| – |
Cooktop or control panel gets excessively hot during oven use.
|
Cooling / Insulation Deficiency | View Details |
| – |
Electric hotplate or radiant ceramic zone does not heat.
|
Open Heating Element or Control Fault | View Details |
| – |
Excessive steam escaping from oven door or control panel area.
|
Steam Venting / Seal Issue | View Details |
| – |
Gas burner flame is yellow, noisy, or lifting off the burner.
|
Incorrect Gas-Air Mixture / Burner Adjustment Fault | View Details |
| – |
Gas burner will not ignite, or the flame goes out immediately after releasing the knob.
|
Gas Burner Ignition/Flame Supervision Failure | View Details |
| – |
Oven does not heat in any mode (no error code displayed).
|
No Power to Heating Circuit | View Details |
| – |
Oven door does not close properly or heat escapes around the door.
|
Door Hinge / Seal Misalignment | View Details |
| – |
Oven door glass is loose, rattling, or has condensation between panes.
|
Door Glass Assembly Fault | View Details |
| – |
Oven fan is very noisy, rattling, or scraping during operation.
|
Worn or Obstructed Convection Fan | View Details |
| – |
Oven heats but cannot reach set temperature or takes very long to preheat.
|
Partial Heating / Element Degradation | View Details |
| – |
Oven interior light does not work, but the oven heats normally.
|
Oven Lamp Circuit Fault | View Details |
| – |
Oven light works but fan and heating do not start when a function is selected.
|
Function Selector Switch Failure | View Details |
| – |
Range trips the circuit breaker or RCD when the oven or cooktop is turned on.
|
Electrical Short or Earth Leakage | View Details |
| – |
Strong burning smell or smoke from oven during normal cooking (not first use).
|
Grease Build-up / Element Contamination | View Details |
No matching codes found
Advertisements