Leisure gas hob with electronic ignition shows E13 on the display (on models with timer) and burners will not ignite.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off the gas supply at the isolation valve if you smell gas. Do not use naked flames to test for leaks.
User-level checks:
- Ensure the gas supply to the cooker is turned on and that other gas appliances are working.
- Clean and dry the burner caps and ignition electrodes. Spills can cause misfiring or continuous sparking.
- Check that the burner caps are correctly seated on the bases.
Technical checks:
- With power isolated, access the ignition module (usually behind the front panel or under the hob top). Inspect for cracks, burn marks, or loose connections.
- Test the thermocouples / flame failure devices for continuity and correct millivolt output when heated (requires specialist equipment).
- Replace the ignition module if no spark is produced on any burner and wiring is intact.
Warning: Gas work must be carried out by a suitably qualified gas engineer in many jurisdictions. Do not attempt to adjust gas valves or regulators yourself.
Repair Difficulty
Required Part
We may earn a commission from links on this page.