Maytag Ranges & Cooktops Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E0
Induction or electronic cooktop displays E0 and will not heat.
No Pan Detected / Incompatible Cookware
E1
Induction or glass cooktop displays E1 and shuts down.
Cooktop Overheat / Sensor Error
E2
Induction or glass cooktop displays E2 and beeps.
Cooktop Sensor or Control Board Error
F1-1
Electronic range control beeps, displays F1-1, and oven functions are disabled.
Electronic Oven Control Keypad Failure
F1-3
Oven will not start or shuts off; display shows F1-3.
Oven Temperature Sensor Circuit Open
F1-4
Oven inoperative; display shows F1-4 shortly after power-up or when starting a bake cycle.
Oven Temperature Sensor Circuit Shorted
F1-5
Display shows F1-5, and oven functions are disabled.
EOC Internal Failure
F2-1
Oven overheats; display shows F2-1 during or after a bake cycle.
Oven Over-Temperature Condition
F2-2
Oven will not heat properly, display shows F2-2
Oven Temperature Too Low / Sensor Out of Range
F3-1
Display shows F3-1, oven shuts off or will not start
Upper Oven Temperature Sensor Open (Double Oven Models)
F3-2
Display shows F3-2, lower oven inoperative on double-oven range
Lower Oven Temperature Sensor Open
F3-3
Display shows F3-3, oven temperature erratic or oven shuts off
Oven Temperature Sensor Shorted
F30
Display shows F30, oven will not heat or shuts off
Oven Temperature Sensor Open (Alternate Code Set)
F31
Display shows F31, oven temperature erratic or no heat.
Oven Temperature Sensor Shorted (Alternate Code Set)
F5-1
Display shows F5-1, oven door will not lock or unlock during self-clean
Oven Door Lock Switch Failure
F5-2
Display shows F5-2, self-clean will not start or door remains locked after cycle
Oven Door Latch Motor Failure
F7-1
Display shows F7-1, oven will not heat or relay clicking is heard repeatedly
EOC Relay Stuck or Shorted
F9-1
Display shows F9-1, oven door will not lock for self-clean
Door Lock Not Engaging
F9-2
Display shows F9-2, oven door will not unlock after self-clean
Door Lock Stuck Locked
F90
Display shows F90, oven door lock problem during self-clean.
Door Lock Motor or Switch Failure (Alternate Code Set)
F91
Display shows F91, oven door will not unlock.
Door Lock Not Unlocking (Alternate Code Set)
F92
Display shows F92, door lock error during self-clean.
Door Lock Mechanism Error
F93
Display shows F93, self-clean will not start.
Door Lock Not Engaging for Clean
F94
Display shows F94, oven door lock error after self-clean.
Door Lock Stuck or Feedback Error
F95
Display shows F95, repeated door lock error on self-clean attempts.
Persistent Door Lock Failure
LOC
Control panel displays LOC or a lock icon, and buttons do not respond.
Control Lock (Child Lock) Activated
PF
Display shows PF; oven or cooktop may reset clock and settings.
Power Failure / Power Interruption
Symptom
Clock and display work but oven will not start (no heat, no relay click)
Control Not Sending Bake/Broil Signal
Symptom
Control knobs are hard to turn or feel loose.
Worn or Contaminated Surface Control Knobs/Shafts.
Symptom
Convection fan does not run in convection mode.
Convection Fan Motor Failure.
Symptom
Cooktop glass is cracked or shattered
Damaged Ceramic Glass Cooktop
Symptom
Electric surface element will not heat on a coil-top Maytag range.
Open Surface Element or Infinite Switch Failure
Symptom
Gas oven lights but then goes out or cycles off too soon.
Flame Sensing / Weak Igniter
Symptom
Gas oven will not ignite; broiler may still work.
Bake Ignition Failure (Gas Range)
Symptom
Gas surface burner will not ignite; clicking is heard but no flame.
Surface Burner Ignition Failure
Symptom
Gas surface burner will not spark on one or more burners
Ignition Spark Failure
Symptom
Oven door will not close fully or has a gap
Door Hinge or Gasket Misalignment
Symptom
Oven door will not open after a self-clean cycle (no code displayed)
Door Lock Mechanism Stuck
Symptom
Oven fan runs continuously even when the oven is off.
Stuck Cooling or Convection Fan Circuit.
Symptom
Oven light will not turn on
Oven Cavity Light Circuit Failure
Symptom
Oven or cooktop emits a strong burning or electrical smell
Overheating Component or Electrical Insulation Burn
Symptom
Oven or cooktop trips the breaker when turned on
Short Circuit in Heating Circuit
Symptom
Oven takes excessively long to preheat
Reduced Heating Performance
Symptom
Oven temperature is inaccurate (too hot or too cold) with no error code.
Oven Temperature Calibration / Sensor Drift
Symptom
Oven will not heat on bake; broil still works.
Open Bake Element Circuit
Symptom
Oven will not heat on broil; bake works normally.
Open Broil Element Circuit
Symptom
Radiant glass-top element will not heat.
Open Radiant Element or Surface Control Failure
Symptom
Range control panel is completely dead, no display or response
No Power to Control / Dead EOC
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E0 |
Induction or electronic cooktop displays E0 and will not heat.
|
No Pan Detected / Incompatible Cookware | View Details |
| E1 |
Induction or glass cooktop displays E1 and shuts down.
|
Cooktop Overheat / Sensor Error | View Details |
| E2 |
Induction or glass cooktop displays E2 and beeps.
|
Cooktop Sensor or Control Board Error | View Details |
| F1-1 |
Electronic range control beeps, displays F1-1, and oven functions are disabled.
|
Electronic Oven Control Keypad Failure | View Details |
| F1-3 |
Oven will not start or shuts off; display shows F1-3.
|
Oven Temperature Sensor Circuit Open | View Details |
| F1-4 |
Oven inoperative; display shows F1-4 shortly after power-up or when starting a bake cycle.
|
Oven Temperature Sensor Circuit Shorted | View Details |
| F1-5 |
Display shows F1-5, and oven functions are disabled.
|
EOC Internal Failure | View Details |
| F2-1 |
Oven overheats; display shows F2-1 during or after a bake cycle.
|
Oven Over-Temperature Condition | View Details |
| F2-2 |
Oven will not heat properly, display shows F2-2
|
Oven Temperature Too Low / Sensor Out of Range | View Details |
| F3-1 |
Display shows F3-1, oven shuts off or will not start
|
Upper Oven Temperature Sensor Open (Double Oven Models) | View Details |
| F3-2 |
Display shows F3-2, lower oven inoperative on double-oven range
|
Lower Oven Temperature Sensor Open | View Details |
| F3-3 |
Display shows F3-3, oven temperature erratic or oven shuts off
|
Oven Temperature Sensor Shorted | View Details |
| F30 |
Display shows F30, oven will not heat or shuts off
|
Oven Temperature Sensor Open (Alternate Code Set) | View Details |
| F31 |
Display shows F31, oven temperature erratic or no heat.
|
Oven Temperature Sensor Shorted (Alternate Code Set) | View Details |
| F5-1 |
Display shows F5-1, oven door will not lock or unlock during self-clean
|
Oven Door Lock Switch Failure | View Details |
| F5-2 |
Display shows F5-2, self-clean will not start or door remains locked after cycle
|
Oven Door Latch Motor Failure | View Details |
| F7-1 |
Display shows F7-1, oven will not heat or relay clicking is heard repeatedly
|
EOC Relay Stuck or Shorted | View Details |
| F9-1 |
Display shows F9-1, oven door will not lock for self-clean
|
Door Lock Not Engaging | View Details |
| F9-2 |
Display shows F9-2, oven door will not unlock after self-clean
|
Door Lock Stuck Locked | View Details |
| F90 |
Display shows F90, oven door lock problem during self-clean.
|
Door Lock Motor or Switch Failure (Alternate Code Set) | View Details |
| F91 |
Display shows F91, oven door will not unlock.
|
Door Lock Not Unlocking (Alternate Code Set) | View Details |
| F92 |
Display shows F92, door lock error during self-clean.
|
Door Lock Mechanism Error | View Details |
| F93 |
Display shows F93, self-clean will not start.
|
Door Lock Not Engaging for Clean | View Details |
| F94 |
Display shows F94, oven door lock error after self-clean.
|
Door Lock Stuck or Feedback Error | View Details |
| F95 |
Display shows F95, repeated door lock error on self-clean attempts.
|
Persistent Door Lock Failure | View Details |
| LOC |
Control panel displays LOC or a lock icon, and buttons do not respond.
|
Control Lock (Child Lock) Activated | View Details |
| PF |
Display shows PF; oven or cooktop may reset clock and settings.
|
Power Failure / Power Interruption | View Details |
| – |
Clock and display work but oven will not start (no heat, no relay click)
|
Control Not Sending Bake/Broil Signal | View Details |
| – |
Control knobs are hard to turn or feel loose.
|
Worn or Contaminated Surface Control Knobs/Shafts. | View Details |
| – |
Convection fan does not run in convection mode.
|
Convection Fan Motor Failure. | View Details |
| – |
Cooktop glass is cracked or shattered
|
Damaged Ceramic Glass Cooktop | View Details |
| – |
Electric surface element will not heat on a coil-top Maytag range.
|
Open Surface Element or Infinite Switch Failure | View Details |
| – |
Gas oven lights but then goes out or cycles off too soon.
|
Flame Sensing / Weak Igniter | View Details |
| – |
Gas oven will not ignite; broiler may still work.
|
Bake Ignition Failure (Gas Range) | View Details |
| – |
Gas surface burner will not ignite; clicking is heard but no flame.
|
Surface Burner Ignition Failure | View Details |
| – |
Gas surface burner will not spark on one or more burners
|
Ignition Spark Failure | View Details |
| – |
Oven door will not close fully or has a gap
|
Door Hinge or Gasket Misalignment | View Details |
| – |
Oven door will not open after a self-clean cycle (no code displayed)
|
Door Lock Mechanism Stuck | View Details |
| – |
Oven fan runs continuously even when the oven is off.
|
Stuck Cooling or Convection Fan Circuit. | View Details |
| – |
Oven light will not turn on
|
Oven Cavity Light Circuit Failure | View Details |
| – |
Oven or cooktop emits a strong burning or electrical smell
|
Overheating Component or Electrical Insulation Burn | View Details |
| – |
Oven or cooktop trips the breaker when turned on
|
Short Circuit in Heating Circuit | View Details |
| – |
Oven takes excessively long to preheat
|
Reduced Heating Performance | View Details |
| – |
Oven temperature is inaccurate (too hot or too cold) with no error code.
|
Oven Temperature Calibration / Sensor Drift | View Details |
| – |
Oven will not heat on bake; broil still works.
|
Open Bake Element Circuit | View Details |
| – |
Oven will not heat on broil; bake works normally.
|
Open Broil Element Circuit | View Details |
| – |
Radiant glass-top element will not heat.
|
Open Radiant Element or Surface Control Failure | View Details |
| – |
Range control panel is completely dead, no display or response
|
No Power to Control / Dead EOC | View Details |
No matching codes found
Advertisements