Oven door will not lock for self-clean or remains locked after cycle completes.

Safety first: Turn off power at the breaker. Do not force the door open; this can cause permanent damage.

Steps to check and correct:

• Allow cooling: If the door is locked after self-clean, allow the oven to cool completely; some locks will not release until a safe temperature is reached.
• Power reset: Turn off the breaker for 5 minutes, then restore power to see if the lock resets.
• Inspect latch alignment: Check that the door latch and strike line up properly. Adjust hinges or strike if needed.
• Access lock motor: Remove the top panel or control panel to access the lock motor assembly. Inspect for broken linkages or jammed parts.
• Replace lock assembly: If the motor does not move or the switch does not change state, replace the door lock assembly.

When to call a technician: If you cannot manually release the lock or if the mechanism is buried behind panels, professional service is recommended.