Gaggenau
Ice Maker Mechanical or Fill Problem
Ice maker not producing ice, but freezer is cold and water dispenser (if present) works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Ice maker turned off at control panel, Jammed ice cubes in mold, Failed ice maker motor, Frozen or kinked fill tube
How to Fix / Troubleshooting
Safety: Disconnect power and shut off water supply before servicing the ice maker.
Steps:
- 1. Check settings: Ensure the ice maker function is enabled on the control panel.
- 2. Inspect ice maker: Remove the ice bin and look for jammed cubes or frost blocking the ejector arm. Clear any obstructions.
- 3. Check fill tube: Inspect the water fill tube entering the ice maker for ice blockage. If frozen, thaw gently with warm air.
- 4. Reset ice maker: Use the reset button or power cycle the ice maker if your model supports it.
- 5. Replace ice maker: If the unit does not cycle or fill after these steps, replace the ice maker assembly with a Gaggenau-compatible part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements