Error code 1F or IF is displayed. The ice maker is not producing ice, and fan noise from the ice compartment may be absent.

Safety first: Unplug the refrigerator before working in the ice compartment.

Procedure:

• 1. Remove the ice bin: Take out the ice bucket from the door or upper compartment to access the ice maker housing.
• 2. Access the fan: Remove the screws securing the ice maker cover and gently pull it off to expose the fan assembly.
• 3. Check for ice blockage: Look for frost or ice around the fan blades. If present, defrost with a hair dryer on low, keeping it moving to avoid damage.
• 4. Spin the fan by hand: Ensure the fan rotates freely. If it binds or feels rough, the motor is likely failing.
• 5. Inspect the wiring: Verify the fan connector is tight and the wires are intact.
• 6. Test the motor: With power disconnected, measure the resistance across the motor terminals. An open circuit indicates a bad motor.
• 7. Replace the fan motor: If defective, install a new ice maker fan motor assembly compatible with your Kenmore model.