E16 error is displayed. The interior lights may stay on or turn off incorrectly, and the door alarm may not function properly.

Safety first: Unplug the refrigerator before removing any trims or switch housings.

Steps:

• 1. Locate door switch or sensor: Siemens refrigerators may use mechanical plunger switches or hidden magnetic reed sensors in the cabinet frame.
• 2. Test operation: For plunger switches, press the switch manually and listen for a click; check if lights respond when power is restored. For reed sensors, move a magnet near the sensor location and observe light behavior.
• 3. Inspect magnet alignment: Ensure the magnet in the door gasket or trim aligns with the sensor when the door is closed. Adjust gasket or trim if necessary.
• 4. Check wiring: Remove the switch housing and inspect wiring for breaks or loose connectors.
• 5. Replace faulty switch/sensor: Install a new Siemens-compatible door switch or reed sensor if defective.

Tip: A faulty door sensor can also cause temperature issues because the control may think the door is always open.