Refrigerator door does not close properly or pops open; warm air enters and condensation forms.

Safety first: Have another person assist when adjusting doors to prevent injury or dropping the door.

Steps:

• 1. Level the cabinet: Adjust front leveling feet so the refrigerator is stable and slightly tilted back.
• 2. Tighten hinges: Open the door and tighten the screws on the upper and lower hinges with the appropriate tool.
• 3. Adjust door height: Some Siemens hinges allow vertical adjustment. Loosen the adjustment screw, reposition the door, and retighten.
• 4. Reduce door load: Remove heavy items from door shelves that may be stressing the hinges.
• 5. Replace worn hinges: If there is excessive play or sagging, replace the hinge or hinge bushings with Siemens parts.

Tip: After adjustment, check that the door gasket seals evenly all around by closing a strip of paper at multiple points.