Robomow vibrates excessively or shakes while mowing.

Safety first: Turn OFF the mower and disconnect from the base station. Wear gloves when handling the blade.

• Inspect blade: Check for bends, cracks, or missing sections. Replace the blade if any damage is found.
• Verify correct installation: Ensure the blade is mounted in the correct orientation and centered on the hub.
• Clean blade: Remove caked‑on grass or mud from the blade surfaces to restore balance.
• Test vibration: After reassembly, run the mower in a safe area and observe. If vibration persists, the motor shaft may be bent and the motor should be replaced.