GE Profile Electrical Short or Overload

Washer-dryer combo trips the household circuit breaker during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted heating element, Shorted drive motor, Damaged power cord, Water leak contacting electrical components

Safety first: Do not repeatedly reset a tripping breaker. Unplug the unit and keep it unplugged until the issue is diagnosed.

Inspect for leaks: Check inside the unit for signs of water near electrical components. Repair any leaks first.
Check power cord: Inspect the power cord for cuts or burns; replace it if damaged.
Test heater and motor: Using a multimeter, test the heating element and drive motor for shorts to ground.
Replace shorted components: Replace any component that shows continuity to chassis ground (a short).
Consult electrician: If the appliance tests good, have a qualified electrician verify the household circuit and breaker.

Professional Required 5/5

Dryer Heating Element

Check Price on Amazon

We may earn a commission from links on this page.