Grundig Door Lock Stuck Closed

Washer-dryer door will not unlock at the end of the cycle; clothes are trapped inside.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed door interlock, control board not sending an unlock signal, water still detected in the drum, swollen door seal jamming the door.

Safety first: Switch off and unplug the appliance. Do not force the door open with tools, as this may damage the cabinet or glass.

Wait and check: Allow several minutes after the cycle ends; some Grundig models delay unlocking. Ensure the drum has fully stopped.
Check for water: If water is visible in the drum, drain via the pump filter manually. The door will not unlock if the water level is high.
Use emergency release: Many models have a manual door release near the pump filter. Open the lower flap and pull the colored tab or lever to release the lock.
Inspect and replace lock: Once open, test the door lock as described in door lock fault sections and replace if defective.

Medium 3/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.