Logik
Display Module / Low-Voltage Supply Fault
Display is dim, flickering, or completely blank while the machine otherwise runs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display backlight, Loose display connector, Faulty low-voltage regulator on PCB, Damaged display module
How to Fix / Troubleshooting
Safety first: Unplug the appliance before accessing the control area.
- Step 1 – Check for Machine Operation: Confirm whether the machine still responds to button presses and runs cycles. If it does, the fault is likely limited to the display module itself.
- Step 2 – Inspect Display Connectors: Remove the control panel and carefully reseat the display ribbon cable or connector.
- Step 3 – Visual Inspection for Damage: Look for any burnt components on the display board or the main PCB's low-voltage section.
- Step 4 – Replace Display Module or UI PCB: If connections are sound but the display remains dim or blank, replace the display module or the entire UI PCB as supplied for your specific Logik model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements