Logik Dryer Condensation / Pump-Out Fault

Washer-dryer stops during drying with water remaining in the drum.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked condenser causing poor water separation, Blocked drain path from condenser to pump, Weak drain pump, Faulty level sensor in drying system

Safety first: Unplug the appliance and allow it to cool. Water may spill when hoses are removed.

Step 1 – Clean Condenser Unit: Remove and thoroughly clean the condenser unit. Ensure all fins are clear of lint and debris.
Step 2 – Check Condenser Drain Path: Locate the small hose connecting the condenser tray to the drain pump or sump. Clear any blockages and ensure it slopes correctly for drainage.
Step 3 – Drain Pump Check: Verify that the drain pump operates correctly during drying. If it is weak or intermittent, replace the pump.
Step 4 – Condenser Tray Sensor: Some models use a float switch or sensor in the condenser tray. Clean it and ensure free movement; replace if defective.

Medium 3/5

Condenser Drain Hose

Check Price on Amazon

We may earn a commission from links on this page.